GAS PRODUCT CATALOGUE
34Pages

HYDROGEN READY Isiflo Sprint and Isiflo Brass is one of the first brands worldwide which obtained KIWA approval for Hydrogen use.

The company Product Development Technical information Installation Instructions Seal Liner Sprint Push-in Couplings Eco Line Repair Coupling Technical information Installation Instructions Support Liner Mechanical Couplings 6. GENERAL CONDITIONS OF SALES

THE COMPANY Isiflo is producing high quality products for the Gas, Water and Wastewater sector. All development and production are made locally with a worldwide distribution through network of daughter companies, agents and distributors. Our products are made in both composite material and corrosion resistant brass and most of them fit all kind of pipes. Isiflo is a leading brand in the European utility industry. With support from NCE Raufoss Manufacturing, Isiflo has a long tradition for innovation. All our products are produced locally in Norway and Sweden. Isiflo has subsidiaries in...

Our Headquarter is situated in Raufoss Industrial Park: - Norway Our subsidiaries are located in: - France - Germany - Sweden - Denmark - The Netherlands We have distribution in: - Great Britain - Belgium - Luxembourg - Spain - Portugal - Finland - Switzerland - Italy - Austria - Hungary - Lithuania - Czech Republic - Poland - Slovakia - Romania - Bulgaria - Greece - Iceland - Turkey - South Africa - Oman We have representative agents in: - USA - Jamaica - Bahamas - Algeria - Senegal - Morocco - United Arab Emirates - Bahrain

PRODUCT DEVELOPMENT Natural gas is an important global source of energy. There are millions of house connections for gas. The supply of gas through a distribution system of pipe network is transport of energy with a reduced CO2 footprint. Without exception, safety in the distribution network is of highest focus and has no compromise. Thereof, the choice of right material has the highest priority. Our products for gas are approved through the strictest testing and carry the certificates from DVGW, KIWA Gastec, ÖVGW etc. The tests are carried out according to EN437/EN1555/ISO17885. Isiflo...

PRODUCTION AND QUALITY SYSTEMS All our products are produced in Norway according to the strictest QA and HSE regulations. The production is certified according to ISO 9001:2015 and ISO 14001:2015. In our product range you can choose from push-in and mechanical fittings. SUSTAINABILITY AND SHARED VALUE CREATION Our production plant in Raufoss is only using renewable energy in the production. The assembly of the products is done in a labour training centre. This was established in 2014 by Isiflo, together with the local labour office to assist people to improve their job qualification. This...

COMPOSITE COUPLINGS Our composite products are made of a glassfibre reinforced polyamid, developed for high strength and long life. The material technology together with the product design give high strength. Our composite couplings are lead free and corrosion resistant, which results in environmental friendly products with a very long lifetime. The designs are based on a time saving push-in solution. The patented sealing system has a push-back ring that activate the grip-ring and compress the sealing in one simple move. This secure a tight connection, even at vacuum and low pressure. Our...

COMPOSITE CHARACTERISTICS The Composite material can be molded into different shapes. By controlling type orientation of the fibres, the material can be designed in a unique way. These characteristics give the material flexible use in many different industries. The Composite material offers many advantages; in addition to being a sustainable choice, it is a user friendly material with many important properties as: - CORROSION FREE - LIGHT WEIGHT - EXTREME MECHANICAL STRENGTH - LONG LIFE TIME The Airline Industry is constantly increasing the use of Composite material. For instance, the 787...

TECHNICAL INFORMATION Pushback Ring Clamp Ring O-Ring Body Insert Depth MATERIAL DESCRIPTION BODY Glass fibre reinforced Polyamide 12 PUSH-BACK RING CLAMP RING AREAS OF USE NATURAL GAS AND HYDROGENE Temperature: -20˚C to 40˚C MOP/Operating pressure: Max 10 bar Pipes: Extruded Pe Pipes after EN - 1555 ATTENTION! Always use our Seal Liner especially developped for use with Sprint to have an approved and safe connection! Not recommended to be used on moulded PE-pipes! OTHER MEDIA Ethanol (ex. HX35-HX95), glycol, diesel, gazoline. For other media please contact your local Isiflo representative.

Cut the pipe straight and chamfer the inner edge of pipe with an appropriate tool. Insert the Seal Liner without twist or use of lubricant. 90° 2. Mark the insert depth on the pipe. 3. Lubricate the outer O-ring of the seal liner with Molykote G-5511 grease (or similar) Push the pipe in the coupling with a twist. For installation video see www.isiflo.com/sprint

SEAL LINER The inner surface of the pipe is mostly perfect and undamaged, therefore we seal it with our patented Isiflo Seal Liner. This gives a secure inner and outer seal to the PE pipe. Timesaving and easy installation No need for special tools No special qualifications needed THE TRIPPLE SEALING FUNCTION The ISIFLO Seal Liner secure tightness through a triple sealing: Between the liner and the inner surface of the pipe. Between the coupling and the outher surface ot the pipe. Between the pipe end and the body of the coupling.

Venturi principle in Composite Material The Isiflo Seal Liner is produced in composite material and designed with a “Venturi principle” to optimize flow and prevent pressure drop and flow restrictions. Gas systems Drinking Water Distribution Underpressure (Vacuum) systems Compressed air For Assembly Instructions see page 11. TYPE 182: SEAL LINER Dxd Item Number D = Dimension (OD) in mm d = Pipe wall thickness in mm

SPRINT PUSH-IN COUPLINGS TYPE 100/102: STRAIGHT COUPLING DxD TYPE 105/110/112: MALE COUPLING DxR D = Dimension (OD) in mm R = Conical pipe thread acc. to ISO 7 G = Cylindr