310
310
ISI 310 is a rigid friction material, primarily used in brakes for tractors, construction equipment, and industrial applications. It is available in pads, facings, and slabs, and is designed for dry use. The material is moulded, ensuring a consistent structure suitable for bonding and riveting applications.
The specific weight of ISI 310 is 2.20 g/cm³, with a Shore D hardness of 70. The dynamic friction coefficient at 100°C ranges from 0.37 to 0.47, with an average of 0.42. Specific wear after tribological testing is measured at 0.78 cm³/106Kgm.
Thermal conductivity at room temperature is between 1.987 and 1.997 W/m°K, and at 100°C, it ranges from 2.275 to 2.335 W/m°K.
The operating temperature for ISI 310 is up to 250°C, with a maximum temperature of 400°C. The specific pressure should be less than 30 Kg/cm², and the relative speed can reach up to 30 m/sec.
The document includes graphs illustrating the average friction coefficient over a series of brake applications at 100°C, showing baseline, wear, and fade characteristics. The graphs also depict temperature changes during fade and recovery phases, highlighting the material's performance under varying conditions.
Catalog excerpts
Scheda Tecnica / Technical Data Sheet Revisione / Revision 4 03/07/2018 DESCRIZIONE PRODOTTO / PRODUCT DESCRIPTION PROPRIETA FISICHE E TRIBOLOGICHE PHYSICAL AND TRIBOLOGICAL PROPERTIES Tutte le informazioni fornite nella presente scheda sono riportate sulla base delle nostre migliori conoscenze attuali senza pretesa di completezza; le prove sono eseguite secondo una procedura interna, di cui possiamo fornire documentazione. Le caratteristiche dei materiali d'attrito dipendono fortemente dalle applicazioni e dalle condizioni: il cliente e tenuto a verificarne la piena corrispondenza con le proprie esigenze. These informations are based on our best knowledge and don’t claim to be complete;our tests are performed according to our internal procedure and we can provide our customer with its description. Friction material performance is highly application and process dependent: the customer must verify the match with his own needs. Isibond S.a.s - via F. Santi, 13 -10024 Moncalieri (TO) - tel 0116472496 - fax 0116470868 -www.isibond.it
Open the catalog to page 1
Scheda Tecnica / Technical Data Sheet Baseline I - Wear test - Baseline F 0,60 Average friction coefficient Fade Initial temperature Final temperature Average friction coefficient Recovery Initial temperature Final temperature Average friction coefficient Tutte le informazioni fornite nella presente scheda sono riportate sulla base delle nostre migliori conoscenze attuali senza pretesa di completezza; le prove sono eseguite secondo una procedura interna, di cui possiamo fornire documentazione. Le caratteristiche dei materiali d’attrito dipendono fortemente dalle applicazioni e dalle condizioni:...
Open the catalog to page 2All ISIBOND S.A.S catalogs and technical brochures
FINAFF CATALOG117 Pages
3043 Pages
3013 Pages
2043 Pages
2023 Pages
BALL RAMP BRAKES9 Pages