X-ray Inspection IX-GA Series IX-GA-65100 All the security of X-ray inspection for larger items With an inspection chamber height option of 270mm and an X-ray tube voltage of up to 100 KV, the IX-GA-65100 can inspect, for example, a 25kg block of butter, a 65cm-wide case of snack bags or a bag of powdered ingredients. Items can be up to 650mm wide and up to 1000mm in length. The conveyor will run at up to 30m/min and can handle weights of up to 50kg. A version is available (IX-GA-65100-E) which uses a higher resolution X-ray sensor to deliver higher clarity images. For those wanting to detect packages over 270mm high, the 65100-A is available for up to a package height of 420mm. SIGNAL TOWER 1175 MAIN POWER SWITCH (BELT WIDTH) EMERGENCY STOP SWITCH EMERGENCY STOP SWITCH X-ray tube voltage X-ray tube current X-ray output X-ray protection Protective curtain (rapidly detachable) X-ray emissions 1 µSv/h or less, including conveyor entrance/exit Product configuration With or without packaging Length Width Inspection Chamber 70 - 1,000mm (intermittent flow) Up to 270mm (Option: Up to 420mm with safety cover) Material Conveyor Dimensions Speed Conveying Weight Cooling method Power supply FDA approval type urethane belt (white) 1,200mm (L) x 700mm (W) 5 - 30m/min. Max 50kg (over entire length) Hermetical air cooling AC200/ 208/ 220/ 230/ 240V, 50/60Hz Voltage variation: ± 10% Protective construction Operation temperature 0ºC - 40ºC ambient temperature (with no freezing or rapid temperature shifts) Operation humidity The specification described here is that for a single unit of equipment. Ishida Europe pursues a policy of continual improvement due to technical development. We therefore reserve the right to deviate from information and specifications in this publication without notice. Ishida Europe shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this mater

GA Series Ishida IX-GA Systems offer the benefits of state-of-the-art X-ray inspection, including all aspects of contaminant detection and product integrity checking. These advanced systems perform with the accuracy, efficiency and reliability expected of a leading-edge engineering firm with well over a century of food industry experience and a worldwide installed base. Models are available to inspect a wide range of product sizes. Detecting the full range of contaminants Offering the highest levels of operator and product safety An Ishida IX-GA will detect metal, glass, bone, shell, grit, plastic...