GENERAL CATALOGUE .40
872Pages

Valid from January 2024

CYLINDERS, PADLOCKS AND COMPONENTS LOCKS FOR METAL FRAMES LOCKS FOR WOODEN FRAMES LOCKS FOR ARMOURED DOORS PANIC AND EMERGENCY EXIT DEVICES LOCKS FOR FIRE RESISTANT DOORS DOOR CLOSERS

Doors opening direction INTERNAL EXTERNAL Inside left DIN right Inside right DIN left Outside right DIN left Outside left DIN right Use Instructions To lubrificate the cylinder use only teflon Rivolta TRS Plus. When assembling, make sure drillings and filings do not enter the lock. Do not paint the lock front plate, since this may cause damages to the deadbolt and the latchbolt. Fixing screws must not cause damage to the product. For installation, carefully follow the user’s instructions or call skilled staff. To install the lock exclusively use the transformers recommended in the...

Dear Customer, In order to support and promote compliance with the applicable regulations and the dissemination of its principles, ISEO has adopted a Code of Ethics, approved Organisational Models compliant with what is required by local regulations of reference and appointed Supervisory Bodies. The “Management system” (“System”) has been identified as the best tool for adopting the “ISEO” values and orienting business towards “optimisation”, that is the combination of the following objectives: • compliance with applicable laws and regulations; • correct management of the risks and...

Pump cylinders Cross-key cylinders Keys - accessories

Cylinders range Standard vertical Flat reversible Compatibility with protection plates Patented system Property card (*) Active security Number of coding (including passive pins) Passive security Cylinder potential Type antipick pins and active pins antipick pins Key profile and Key profile and and active pins antipick pins antipick pins Pin in the body Pin in the body and in the rotor Pin in the body and in the rotor antipick pins antipick pins Key profile and antipick pins and active pins antipick pins and active pins Double profile cylinder Double profile cylinder, double function Drill...

Key strenght and cyclic durability Door mass Fire resistance Corrosion resistance and temperature Attack resistance ISEO cylinders rating according to EN 1303:2015 Category of use Only one grade is identified: Grade 1: for use by people with a high incentive to exercise care and with a small chance of misuse. Key strength and cyclic durability Three grades of durability are identified as follows: Grade 4: (25.000 test cycles) Grade 5: (50.000 test cycles) Grade 6: (100.000 test cycles). Door mass Only one grade of door mass is identified as follows: grade 0 - no door mass requirement....

Cylinders range Standard vertical Flat reversible Compatibility with protection plates Active security Patented system Key copyright Property card (*) Authorised key duplication Number of coding (including passive pins) Passive security Cylinder removal Cam type DIN Pin in the body Pin in the body Pin in the body and in the rotor Pin in the body and in the rotor Drill resistant antipick pins, Anti-picking Key profile and Key profile and Key profile and antipick pins and antipick pins and active pin and active pin active pin protected key antipick pins antipick pins antipick pins profile...

Key strenght and cyclic durability Door mass Fire resistance Corrosion resistance and temperature Attack resistance ISEO cylinders rating according to EN 1303:2015 * R6: standard version with grade “0” anti-drill version with grade D on request Category of use Only one grade is identified: Grade 1: for use by people with a high incentive to exercise care and with a small chance of misuse. Key strength and cyclic durability Three grades of durability are identified as follows: Grade 4: (25.000 test cycles) Grade 5: (50.000 test cycles) Grade 6: (100.000 test cycles). Door mass Only one grade...

Technical product features The R ME patented multi-profile locking system combines the highest safety standards with functionality and design features. The R ME is available in key different, key alike versions and suitable for Masterkey-systems. The patented R ME cylinder is available in both compact and modular version and therefore it represents an ideal solution also for armoured doors. Thanks to the possibility of combination on three-lines encryption the R ME Multiprofile cylinder guarantees a very high permutation calculation and is suitable for multi-level master key systems....

R ME PATENTED EUROPEAN DOUBLE PROFILE CYLINDER WITH FACTORY PROFILE. PROTECTED KEYS. AVAILABLE IN BOTH COMPACT AND MODULAR VERSION. Mechanical version. Up to 13 pin coding, one position of which is the patented element in the cylinder. Antidrill devices on both ends of the cylinder body and plug. STAINLESS STEEL top pins. 30° DIN. Fixing screw. Compact 2 Modular M Key with colored cap A Coprinted key head C Standard 0 Double function 9 Free cam L - The compact cylinder reaches a maximum lenght of 120 mm Basic configuration (30+30) Compact Modular Key type - Key with colored cap - Coprinted...

R ME PATENTED EUROPEAN DOUBLE PROFILE CYLINDER WITH FACTORY PROFILE. ROUND KNOB. PROTECTED KEYS. AVAILABLE IN BOTH COMPACT AND MODULAR VERSION. Mechanical version. Up to 13 pin coding, one position of which is the patented element in the cylinder. Antidrill devices on both ends of the cylinder body and plug. STAINLESS STEEL top pins. 30° DIN. Fixing screw. Compact 2 Modular M Key with colored cap A Coprinted key head C 8 Key alike 9 Nickel-Plated 7 Brass - The compact cylinder reaches a maximum lenght of 120 mm Basic configuration (30+30) Compact Modular Key type - Key with colored cap -...

R ME PATENTED EUROPEAN DOUBLE PROFILE CYLINDER WITH FACTORY PROFILE. PREARRANGED FOR KNOB. PROTECTED KEYS. AVAILABLE IN BOTH COMPACT AND MODULAR VERSION. Mechanical version. Up to 13 pin coding, one position of which is the patented element in the cylinder. Antidrill devices on both ends of the cylinder body and plug. STAINLESS STEEL top pins. 30° DIN. Fixing screw. Compact 2 Modular M Key with colored cap A Coprinted key head C 8 Key alike 9 Nickel-Plated 7 Brass - The compact cylinder reaches a maximum lenght of 120 mm Basic configuration (30+30) Compact Modular Key type - Key with...