Guaranteed Supreme Tool Life and Easy Chip Evacuation!

Market Standard Free Chip Flow Flat Top TANG-GRIP IQ Tools Engineered for Easy Chip Flow Featuring Longer Tool Life! • Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving applications) • TANG-GRIP IQ - single-ended parting insert with an unbeatable clamping method E BLAD G D ROVE FEATURIN IMP RY E MET TOOL LIF TIVITY GEO GER C LON ER PRODU HIGH AN

Flat Top Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-Ended Inserts (1) C- Internal coolant, use with TGTBU HD blocks only. Cooling tube SGCU 341 should be ordered separately. Thickness at the D.O.C. area is 1.65 mm Spare Parts Designation TGSU 35-1.4-IQ TGSU 35-2-IQ TGSU 35-3-IQ-4Z TGSU 35-4-IQ-4Z TGSU 35-5-IQ TGSU 35-6-IQ TGSU 35-7-IQ TGSU 35C-8-IQ TGSU 35C-9-IQ TGSU 56C-7-IQ TGSU 56C-8-IQ TGSU 56C-9-IQ Cooling Tube SGCU SGCU SGCU SGCU SGCU * Optional, should be ordered separately

Blocks for TGSU Parting and Grooving Blades Choose blade by B1 dimension I1) HD - Recommended blocks for TGSU...-8, TGSU...-9 blades Spare Parts

Integral Shank, TANG-GRIP Parting and Grooving Toolholders with 2 Pockets Left-hand shown Designation TGTR/L 2020-3-IQ-2Z TGTR/L 2525-3-IQ-2Z TGTR/L 2020-4-IQ-2Z TGTR/L 2525-4-IQ-2Z Spare Parts Designation TGTR/L-IQ-2Z * Optional, should be ordered separately ED MPROV ATURING I FE METRY TOOL LIFE GEO GER LON 1

Integral Shank, TANG-GRIP Parting and Grooving Toolholder Left-hand shown * Optional, should be ordered separately

Integral Shank, Short-Head TANG-GRIP Parting and Grooving Toolholder Right-hand shown Designation TGTR/L 1010-2T10SH-L120-IQ TGTR/L 1212-2T15SH-L120-IQ TGTR/L 1616-2T18SH-L120-IQ (1) Spare Parts Designation TGTR/L-2T..SH-L120 * Optional, should be ordered separately

Integral Shank TANG-GRIP Parting and Grooving Toolholders with Reinforced Blades, Mainly for Sub-Spindle Machines Right-hand shown Depth Capacity DCTR/L-D Table determining depth of cut as function of wcrkpiece dameter Spare Parts * Optional, should be ordered separately

Heavy Duty Groove-Turn Applications Single-ended inserts for heavy grooving, turning and parting applications, with the tangentially oriented clamping design for extra rigidity required for heavy grooving and turning conditions. SUMO-GRIP System Features • Tangentially oriented pocket, providing a very rigid and secure clamping. • Enables machining at very high feed rates (up to 1.0 mm/Rev). • Recommended for machining large diameter parts and for heavy interrupted cuts. • Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems. • The combination of...

Toolholders for Heavy Duty Groove-Turn and Parting Applications Left-hand shown Designation TGBHR/L 20C-6 TGBHR/L 25C-6 TGBHR/L 25C-8 TGBHR/L 32C-8 TGBHR/L 25C-10 TGBHR/L 32C-10 TGBHR/L 25C-12 TGBHR/L 32C-12 TGBHR/L 25C-14T20 TGBHR/L 32C-14T40 TGBHR/L 40C-14T40 The tools for the 14 mm inserts feature a 1/8" port thread for standard tube fittings. (1) Spare Parts Designation TGBHR/L 20C-6 TGBHR/L 25C-6 TGBHR/L 25C-8 TGBHR/L 32C-8 TGBHR/L 25C-10 TGBHR/L 32C-10 TGBHR/L 25C-12 TGBHR/L 32C-12 TGBHR/L 25C-14T20 TGBHR/L 32C-14T40 TGBHR/L 40C-14T40 Cooling Tube SGCU SGCU SGCU SGCU SGCU SGCU SGCU SGCU...

Grooving and Turning SUMO-GRIP Tools with Channels for High Pressure Coolant Right-hand shown Designation TGBHR/L 25-8-JHP TGBHR/L 32-8-JHP Flow Rate vs. Pressure 70 Bar Flow Rate (liters/min) 100 Bar Flow Rate (liters/min) 140 Bar Flow Rate (liters/min) Designation TGBHR/L 25-8-JHP TGBHR/L 32-8-JHP ETG 8-12 Extractor for 8 to 12.7 mm Inserts Extraction Side Insertion Side * Optional, should be ordered separately Spare Parts Designation TGBHR/L-JHP

Engineered for Maximum GroovE TURNING Performance

g mpinIVITY a E Cl DUCT SECURH PRO G IG HININ H C FOR ACE MA F Tang-Grip Tangentially Clamped Single-Ended Inserts for Face Grooving System Features • Very rigid clamping in a tangentially oriented pocket • Designed for face grooving in 25 to 500 mm diameter range penetration • Enables machining at very high feed rates and interrupted cuts, providing excellent surface finish • Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving applications) • The combination of tangential clamping and free chip flow results in very...

Face Grooving Blades Right-hand shown Designation TNFFH 65R/L-3IQ TNFFH 90R/L-3IQ TNFFH 120R/L-3IQ TNFFH 80R/L-4IQ TNFFH 150R/L-4IQ TNFFH 80R/L-5IQ TNFFH 150R/L-5IQ TNFFH 80R/L-6IQ TNFFH 150R/L-6IQ • B1 dimension links blades and blocks (1) Minimum penetration diameter Maximum penetration diameter Spare Parts Designation TNFFH-IQ * Optional, should be ordered separately ETF 3-6 extractor (should be ordered separately).

Reinforced Face Grooving Blades Right-hand shown Designation TNFFA 30R/L-3IQ TNFFA 35R/L-3IQ TNFFA 40R/L-3IQ TNFFA 46R/L-3IQ TNFFA 54R/L-3IQ TNFFA 65R/L-3IQ TNFFA 80R/L-3IQ TNFFA 35R/L-4IQ TNFFA 45R/L-4IQ TNFFA 60R/L-4IQ TNFFA 80R/L-4IQ TNFFA 40R/L-5IQ TNFFA 50R/L-5IQ TNFFA 70R/L-5IQ TNFFA 100R/L-5IQ TNFFA 45R/L-6IQ TNFFA 60R/L-6IQ TNFFA 80R/L-6IQ TNFFA 110R/L-6IQ (1) Minimum penetration diameter Maximum penetration diameter Spare Parts Designation TNFFA-IQ * Optional, should be ordered separately ing ITY mp Cla UCTIV G URE PROD EC H ININ S IG ACH H M FOR FACE

Engineered for Maximum FACE Grooving Performance 17

S t a&n d a r d Parting Grooving Tools Tangentially Clamped, Single-Ended Parting System TAG Insert Features • Very rigid clamping in a tangentially oriented pocket • Enables machining at very high feed rates and provides excellent straightness and surface finish • Recommended for parting large diameter parts and for interrupted cuts • Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications) • The combination of tangential clamping and free chip flow results in improved tool and insert lifetime...