TANG-GRIP and DO-GRIP Parting Inserts with New Chipformers and Grade IC5400 for Stainless Steel

• New Grade IC5400 Highlights IC5400 - A new MTCVD coated carbide grade for high efficiency stainless steel parting and grooving ISCAR is introducing the IC5400 carbide grade, featuring an effective means of parting and grooving stainless steel. The new grade has a very tough substrate, like the one used for IC830. It is MTCVD TiCN and alpha Al2O3 coated, with the SUMO TEC advanced post-coating treatment. This considerably improves resistance to flaking, chipping and abrasion, preventing built-up edge and this providing prolonged tool life. The ISO application range of the new grade is M30. It...

New Product Announcement Grade Application Range Cutting Speed Selection Guide for Parting Grades ISO P Hard Steel Stainless Steel High Temp Alloys Cast Iron Material Groups Tougher ■ First choice

New Product Announcement TEST No. 1 Application Parting of hollow bars Group Stainnless steel and cast steel Coolant Pressure 70 bar ISCAR Cutting speed (m/min) Major feed (mm/rev) Parts per cutting edge Workpiece Hydraulic valves Application Parting to center Material no. AISI 304 stainless steel Coolant External ISCAR Cutting speed (m/min) Major feed (mm/rev) Parts per cutting edge

• New Chipformers Highlights New LF, LFT and MF chipformers designed for parting and grooving stainless steel and ductile materials ISCAR is expanding its range of parting with LF, LFT and MF chipformers, for parting and grooving stainless steel and also for ductile materials. The new LF chipformer design features a positive rake inclination and sharp cutting edge. It exerts low cutting forces and reduces built-up edge. In addition, it efficiently narrows the chips, leaving a clean cut surface. The LFT chipformer features basically the same design as the LF chipformer, except that it was reinforced...

New Product Announcement The new chipformers should be selected as a first choice option for parting and grooving stainless steel components. Please note: The combination of the new chipformers with IC5400 grade is ISCAR’s first choice recommendation for parting and grooving stainless steel. The following TANG-GRIP and DO-GRIP inserts in grade IC5400 will be available in the first stage: 6080559 TAG N2C IC5400 - An Ideal Combination of Tough Substrate Advanced Technology of MTCVD Coating and SUMO TEC Post Coating Treatment – Your Passport to Success for High-Production Parting of Stainless Steel...

Parting Chipformers Application Range (Refers to 3 mm inserts)

New Product Announcement Selection of Chipformers for Various Workpiece Materials Inserts Alloy Steel Austenitic Stainless High Temp. Alloys Nonferrous Materials Cast Iron Medium to high feed

New Product Announcement TEST REPORT 1 Application: Parting to Center Material No.: AISI 420 Martensitic Stainless Steel Coolant: Emulsion J Type Chipformer Carbide Grade Feed (mm/rev) Cutting Speed (m/min) Parts per Cutting Edge

Double-Sided Parting and Grooving Insert for Stainless Steel

Parting and Grooving Single-Ended Insert for Parting Bars and Tough Applications, Medium Feed W Recommended Machining Data Parting and Grooving Double-Sided Insert, for Soft and Hard Materials, Medium Feed ±0.1 7° R W l Ref. Recommended Machining Data