Catalogs >
ISCAR Tools >
Solution for the aerospace industries

Solution for the aerospace industries
32Pages

Catalog excerpts

Solution for the aerospace industries - 4

Marketing Support Marketing Support & Production Center A Global Metalworking Company In a world of different languages and different mentalities, it is important to have a fully equipped, knowledgeable local supplier to meet your needs. ISCAR knows this. We have subsidiary offices and agents located in 52 major industrial countries. In some of the larger countries, regional offices have been opened to bring ISCAR personnel and facilities as close as possible to customer production sites. Many of our subsidiaries have fully equipped training centers. These centers are dedicated to providing...

Open the catalog to page 4

Solution for the aerospace industries - 5

ISCAR has global manufacturing facilities in each of the following countries: In Europe South Korea United States Spain Switzerland Turkey Hungary Slovenia

Open the catalog to page 5

Solution for the aerospace industries - 6

ISCAR's Manufacturing Solutions Take the Aerospace Industry

Open the catalog to page 6

Solution for the aerospace industries - 8

Part Name: Material: Recommended Grade: Specially tailored groove-turn tool is one of fourteen special tools that have been designed for producing this inconel rear spool.

Open the catalog to page 8

Solution for the aerospace industries - 9

Part Name: Material: Recommended Grade: Specially tailored groove-turn tool for machining an inconel disk. Rear spool Inconel 718 IC907 or IC908

Open the catalog to page 9

Solution for the aerospace industries - 10

Part Name: Material: Recommended Grade: Rotor Disk Inconel 718 IC907 or IC908 Specially tailored tool using CUT-GRIP insert for machining inconel 718 rotor disk.

Open the catalog to page 10

Solution for the aerospace industries - 11

Part Name: Material: Recommended Grade: Stage Disk Inconel 718 IC907 or IC908 Specially tailored tool using standard CUT-GRIP insert for machining this inconel 718 stage disk.

Open the catalog to page 11

Solution for the aerospace industries - 12

Part Name: Material: Recommended Grade: Specially tailored tool using CUT-GRIP insert for machining Inconel 718 diffuser.

Open the catalog to page 12

Solution for the aerospace industries - 13

ISCAR provides the full set of tools, whether standard or specially tailored, to produce complicated parts such as landing gear. In addition, ISCAR produces inserts for machining the most complicated shapes on the most difficult materials required by the aerospace industries. R-CLAMP holders are useful for the most popular ISO inserts, providing outstanding clamping forces that ensure rigidity and stability during the cut. The SUMO TEC series is ISCAR’s latest innovation in the market, featuring improved grades and cutting edge treatment. The coatings are specially designed for machining...

Open the catalog to page 13

Solution for the aerospace industries - 14

Drill with indexable solid carbide insert. Enables machining holes and chamfers with long extensions at high cutting conditions. ISCAR provides specially tailored and standard tools for drilling engine parts.

Open the catalog to page 14

Solution for the aerospace industries - 15

Drill with indexable super positive solid carbide insert, with coolant holes. The coolant is applied directly on the cutting edge. CHAMDRILLJET is an excellent tool for drilling high temperature and aluminum alloys with improved chip evacuation and surface finish. No setup time is needed after indexing the CHAMDRILLJET drill head. Reamer with indexable solid carbide head for high speed reaming. Solid carbide multi-tooth reamer. Provides high accuracy and surface quality. Indexable reamer with 4 lead angle options and 3 rake angle variations, covering most workpiece material types. High...

Open the catalog to page 15

Solution for the aerospace industries - 16

External holders and adapters for a wide range of grooving inserts with various geometries and chipbreakers. DO-GRIP parting insert with coolant hole that passes through the insert, with an outlet near the cutting edge. The DGNC inserts were designed for parting and grooving on stainless steel and high temperature alloys.

Open the catalog to page 16

Solution for the aerospace industries - 17

ISCAR offers a wide variety of groove-turn tools with special chipformers for machining stainless steel and high temperature alloys.

Open the catalog to page 17

Solution for the aerospace industries - 18

ISCAR’s new FF WXCU 08… HELIDO trigon, double-sided, 6 edged insert combines HELIDO’s strength and FEEDMILL’s special geometry to facilitate milling at very high feed rates of up to 3.5 mm/tooth for high volume metal removal. This design provides high stability and enables machining at high feed rates even in long overhang applications. In addition, the new FF WXCU 08… insert is clamped into an inclined dovetail pocket, which provides very firm clamping. This ball nose endmill performs semi-finishing and finishing applications at high feed rates. Its unique design provides a fully effective...

Open the catalog to page 18

Solution for the aerospace industries - 19

ISCAR offers a wide range of high performance solid carbide endmills with various designs for a wide range of materials and applications. Ball nose endmill, featuring unique insert positioning, that ensures reliable clamping. Tool works at high feed rates with high repeatability. Heliball inserts have fully effective helical cutting edges.

Open the catalog to page 19

Solution for the aerospace industries - 20

This advanced balanceable collect chuck system features direct readings from its precision balancing rings for high grade balance. It uses a simple balancing procedure on all types of balancing machines and compensates imbalance up to 61 gr.xmm. The system includes static and dynamic balancing. Slim design with very high gripping force and reduced runout. Used for solid carbide endmills.

Open the catalog to page 20

Solution for the aerospace industries - 21

ECR-B3.. Solid carbide rougher endmills for aluminum and other nonferrous materials. These endmills were designed with an improved cutting edge that enables very high metal removal rates. The serrated cutting edges produce narrow chips, which are easily evacuated. Cutting forces are small, eliminating vibration and they enable machining at very high feeds.

Open the catalog to page 21

Solution for the aerospace industries - 22

A variety of milling head configurations - ball nose, square shoulder, chamfering and slitting cutter - are known as MULTI-MASTER. This new system features ISCAR’s unique threaded carbide heads for superior performance, short indexing time (the tool remains clamped in the machine) and improved economy. Each cutting head has an advanced shape with sharp ground cutting edges. ISCAR’s SOLIDMILL family of solid carbide endmills is for machining aluminum. The endmills are 3 flute, 45° helix, medium length and they are able to perform shouldering, slotting and drilling applications. These...

Open the catalog to page 22

Solution for the aerospace industries - 23

GOLDALU tools have an improved pocket design and are TiN coated. This coating provides high surface hardness, which improves wear resistance and durability, prevents aluminum from adhering to the cutter and gives the tool an impressive appearance. HELIALU inserts have sharp helical cutting edges, polished rakes and a wide range of different corner radii. They are mounted on GOLDALU tools that are balanced for very high RPM machining. Extremely high metal removal rates.

Open the catalog to page 23