SD-SP15 New T-Slot Cutters with a Unique Spline Connection

Highlights 32 mm diameter milling heads with 8 teeth in a width range of 2 to 6 mm for maximum depth of cut up to 8 mm. ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters. The new cutters consist of interchangeable solid carbide T-slot milling heads and cylindrical steel shanks assembled by means of a unique spline connection. Also available is an adapter with the SP spline connection on one side and T12 MULTI-MASTER threaded connection on the other side, which enables using all T12 standard MULTI-MASTER shanks. The spline connection is used to transmit...

Cutting Data A table is attached which shows recommended cutting conditions. For machining in unstable conditions the table values should be reduced by 20-30%. SD-SP15 – A New Standard of HIgh Quality and Durability in Slot Milling Operations

Interchangeable Solid Carbide T-Slot Milling Heads r Tmax D2 Stepped Cylindrical Shanks for Interchangeable Solid Carbide T-Slot Milling Heads • Apply lubricant to the SR M5X0.5-SP15 screw Spare Parts Designation SD S-A-SP Torx Blade

Adapters for Connecting SD Solid Carbide T-Slot Milling Heads and MULTI-MASTER Shanks • Do not apply lubricant to the T12 MULTI-MASTER threaded connection • Apply lubricant to the SR M5X0.5-SP15 HG screw (1) Clamping wrench size Spare Parts Designation SD CAB Torx Blade * Optional, should be ordered separately

Cutting Recommendations for SD-SP15 T-SLOT Cutters Workpiece Material Typical Material Cutting Speed Vc, m/min Non-alloy steel High alloy steel Grey cast iron Nodular cast iron High temperature alloys ISCAR material grpoup in accordance with VDI 3323 standard Quenched and tempered