*mydirectindustry

Catalogs
ISCAR Tools
PICCO Solid Carbide Mini Boring Bars Metric

PICCO Solid Carbide Mini Boring Bars Metric

Product catalog summary

Overview: This document provides technical specifications for PICCO mini-bars used in internal turning and boring applications. It includes details on various models, their dimensions, and material grades.

Specifications:

Designation: The document lists multiple PICCO models, each with specific designations indicating their size and application.
Dimensions: Key dimensions include minimum bore diameter (ødh6), length (L), and other critical measurements such as L1, R+0.05, and t max.
Material Grades: The bars are available in carbide grades IC28 and PVD coated IC228.

Procedures:

Right or Left-Hand Bars: Users must specify whether they require right-hand or left-hand bars.
Feed and Depth of Cut: For certain models, the document specifies a depth of cut (D.O.C.) of 0.01-0.03 mm and a feed rate of 0.01 mm/rev.

Recommendations:

Holder Compatibility: For holders, users are directed to consult the ISCAR Turning Tools catalog.

Key Models and Applications:

PICCO R/L 080 Series: Suitable for internal back turning with various diameter and length options.
PICCO R/L 050 Series: Designed for smaller diameter boring and internal turning, with specific models for chamfering.

Additional Notes:

Some models are specifically noted for use with ø6mm bars.
Right-hand configurations are shown in diagrams.

Catalog excerpts

PICCO Solid Carbide Mini Boring Bars Metric -1

Min. Bore Designation dh6faLL > +0.05 1 R t max.Dia.Holders PICCO R/L 080.0003-15 4.00.62.629140.100.53.0 PICCO R/L 080.0003-20 4.00.62.634190.100.53.0 PICCO R/L 080.0004-15 4.01.53.529140.150.84.0 PICCO12-4-5PICCO16-4-5 PICCO20-4-5 PICCO R/L 080.0004-25 4.01.53.539240.150.84.0 PICCO R/L 080.0005-20 5.01.94.435190.201.05.0 PICCO R/L 080.0005-30 5.01.94.445290.201.05.0 PICCO R/L 080.0006-20 6.02.35.335190.201.86.0 MG PCO 12-6 > (1) PICCO R/L 080.0006-30 6.02.35.345290.201.86.0 MG PCO 16-6-8 > (1) (1) PICCO R/L 080.0007-20 7.02.76.335190.202.57.0 MG PCO 20-6-8 PICCO16-6-7PICCO20-6-7 PICCO R/L 080.0007-30 7.02.76.345290.202.57.0 Specify right- or left-hand bars. Carbide grades of bars are IC28 and PVD coated IC228. For holders, see ISCAR Turning Tools catalog. > (1) For 6mm only. >

Open the catalog to page 1

All ISCAR Tools catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list