New Product Announcement PARTING, GROOVE-TURN, FEBRUARY 2018 METRIC THREADING, TOOLING Expanding the Multi Connection (MC) JHP Line - Tools with Bottom Fed High Pressure Coolant Channel for Mounting on VDI DIN69880 Tool Holders

New Product Announcement PARTING, GROOVE-TURN, FEBRUARY 2018 THREADING, TOOLING Highlights ISCAR is expanding the Multi Connection (MC) JHP Line by adding parting, grooving, threading and turning tools for VDI tool holders with a bottom fed coolant system. The new system consists of specially designed JHP-MC turning and grooving tools with a bottom coolant inlet hole and VDI-JHPMC tool holders featuring a long coolant outlet slot that enables adjustment of the tool’s overhang.

New Product Announcement PARTING, GROOVE-TURN, FEBRUARY 2018 THREADING, TOOLING VDI DIN69880 is the most popular quick change adaptation system for CNC turning machines with disc-type turrets. This standard holder adaptation serves mainly stationary turning or drilling tools. The tools are widely used by European, Japanese, Korean, USA, Chinese and Taiwanese MTBs, due to their simplicity, low-cost and tool clamping rigidity. • • • • • • VDI DIN69880 Characteristics Easy and fast set-up High stiffness, thanks to straight shank and flange face contact Rigid design due to a serrated clamping system...

PARTING, GROOVE-TURN,THREADING, TOOLING Page 4/24 (1) Cutting width minimum (2) Cutting width maximum Note: Parameter designations are according to ISO13399 standard.

PARTING, GROOVE-TURN, THREADING, TOOLING FEBRUARY 2018 • METRIC 03-2018 TGTR/L-JHP-MC Parting and Grooving Toolholders with Bottom Inlets for High Pressure Coolant Carrying TANG-GRIP Inserts Left-hand shown (1) Cutting width minimum (2) Cutting width maximum Note: Parameter designations are according to ISO13399 standard. Spare Parts ^ Designation * Optional, should be ordered separately

PARTING, GROOVE-TURN,THREADING, TOOLING Page 6/24 • For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance (1) Cutting width minimum (2) Cutting width maximum

PARTING, GROOVE-TURN, THREADING, TOOLING FEBRUARY 2018 • METRIC 03-2018 PCHR/L-24-JHP-MC Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant Coolant outlets (1) Cutting width minimum (2) Cutting width maximum (3) For specific information, refer to insert data Note: Parameter designations are according to ISO13399 standard.

PARTING, GROOVE-TURN, THREADING, TOOLING MAHR/L-JHP-MC Holders with Bottom Inlets for High Pressure Coolant Channels Carrying MODULAR-GRIP Grooving and Turning Adapters

PARTING, GROOVE-TURN,THREADING, TOOLING Page 9/24 MAHR/L-MG-XL-JHP-MC Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters Designation • For Tmax, refer to the adapters data Spare Parts__ft @

PARTING, GROOVE-TURN,THREADING, TOOLING Page 10/24 SER/L-JHP-MC External Threading Tools with Bottom Inlet Coolant Channels • All tools are made for 1.5 helix angle • For multi-tooth inserts use anvils AE16M / AI16M; AE22M / AI22M; AE27M / AI27M • For GTGA inserts, use anvil AE 16-0 (1) Right-hand inserts (ER) for right-hand tools (SER) Note: Parameter designations are according to ISO13399 standard.

PARTING, GROOVE-TURN,THREADING, TOOLING Page 11 /24 SER/L-TT-JHP-MC External Threading Tools with Bottom Inlet Coolant Channels, Carrying Inserts with 10 Threading Corners

PARTING, GROOVE-TURN,THREADING, TOOLING Page 12 / 24 Spare Parts ^ Designation

PWLNR/L-X-JHP-MC Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying HELITURN LD WNMX and WNMG Trigon Inserts

PARTING, GROOVE-TURN,THREADING, TOOLING Page 14 / 24 Spare Parts ' ' Designation

PCLNR/L-X-JHP-MC Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying the CNMX/CNMG 80° Rhombic Inserts • Supplied with TCX 3 seat for CNMX 0906.. inserts and TCN 323 seat for CNMG 0904.. inserts. TCX 4 seat for CNMX 1207.. inserts and TCN 443 seat for CNMG 1204.. inserts. Spare Parts * (a) For CNMX 0906.. (CNMX 34.) inserts (b) For CNMX 1207.. (CNMX 45.) inserts (c) For CNMG 0904.. (CNMG 33.) inserts (d) For CNMG 1204.. (CNMG 43.) inserts

PARTING, GROOVE-TURN, THREADING, TOOLING FEBRUARY 2018* METRIC 03-2018 PTGNR/L-X-JHP-MC Tools with Bottom Inlets for High Pressure Coolant Carrying the TNMX and TNMG Triangular Inserts Frontal coolant on/off screw Right-hand shown

PARTING, GROOVE-TURN, THREADING, TOOLING UVIPCLCR/L-JHP-MC Designation Spare Parts Designation

PARTING, GROOVE-TURN, THREADING, TOOLING UVIDDJNR/L-JHP-MC Designation PDACR/L-JHP-MC Tools with Channels for High Pressure Coolant Carrying the Spare Parts & Designation

PARTING, GROOVE-TURN, THREADING, TOOLING UVIPVACR/L-JHP-MC Designation Spare Parts Designation

PARTING, GROOVE-TURN,THREADING, TOOLING Page 20 / 24 VDI-B1/B4A-JHPMC Radially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools 15c OAW RADW RADWOFRHCDU 2 OAH RHCD5 ^ NEW NEW NEW NEW • Form B1 radial R.H. short, form B4 radial overhead L.H. short Note: Parameter designations are according to ISO13399 standard. Radially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools HF • Form B1 radial R.H. short, form B4 radial overhead L.H. short.

PARTING, GROOVE-TURN,THREADING, TOOLINGPage 21 /24 VDI-B2/B3A-JHPMC Radially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools OAHJz RADH • Form B2 radial L.H. short, form B3 radial overhead R.H. short. Note: Parameter designations are according to ISO13399 standard. VDI-B2/B3AK-JHPMC Radially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools • Form B2 radial L.H. short, form B3 radial overhead R.H. short.

Page 22 / 24 VDI-C1/C4A-JHPMC Axially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools • Form C1 axial R.H., form C4 axial overhead L.H. short. NEW NEWNote: Parameter designations are according to ISO13399 standard. VDI-C1/C4AK-JHPMC Axially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools • Form C1 axial R.H., form C4 axial overhead L.H. short.