Catalogs >
ISCAR Tools >
New TIGER-IQ Heavy Duty Grooving Tools and Inserts

New TIGER-IQ Heavy Duty Grooving Tools and Inserts
7Pages

Catalog excerpts

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 1

GROOVE TURN New TIGER-IQ Heavy Duty Grooving Tools and Inserts

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 2

GROOVE TURN Highlights • Very rigid dovetail clamping • User-friendly locking mechanism with frontal access - Just a half-turn to clamp/unclamp the insert • No need to fully extract the screw (no falling parts) • Unobstructed rake face for uninterrupted chip flow • Cartridge system, an economical solution for blades and special tools The DOVEIQGRIP line is an evolution of the very successful TIGER wide grooving inserts family. The new line features a unique user-friendly locking mechanism designed for inserts in widths of 10, 12, 14, 16, 18 and 20 mm and is made from SUMO TEC grade IC808....

Open the catalog to page 2

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 3

GROOVE TURN • Unique, user-friendly (patented) frontal locking mechanism. Just a half-turn to lock the insert. In addition, there is no risk of falling parts, as there is no need to fully extract the screw, as in most available systems. Click Link to See Short Video • Unobstructed chip flow, because the tool has no upper clamp or jaw. • Normally in grooving (especially in deep grooving), the chip flow prevents the coolant from reaching the cutting edge. ISCAR’s new tools have a bottom frontal coolant K-type system (high pressure possible). This substantially prolongs tool life and improves...

Open the catalog to page 3

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 4

GROOVE TURN The DOVEIQGRIP blades carry cartridges attached by a dovetail connection, providing very high rigidity. The system was designed so that in case of crash during machining, only the cartridge will be damaged. The cartridges also provide an economical protection solution, thus prolonging service life of the blades. The cartridge system can also be used for specials and exchangeable heads, providing savings on expensive tool cost. Click Link to See Short Video Click Link to See Short Video

Open the catalog to page 4

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 5

GROOVE TURN External Holders for Wide Grooving Inserts l1 Tmax-r Designation THDR/L 2525-10T20-IQ THDR/L 3232-10T20-IQ THDR/L 2525-12T20-IQ THDR/L 3232-12T20-IQ THDR/L 2525-14T20-IQ THDR/L 3232-14T20-IQ THDR/L 3232-16T40-IQ THDR/L 4040-16T50-IQ THDR/L 3232-18T40-IQ THDR/L 4040-18T50-IQ THDR/L 3232-20T40-IQ THDR/L 4040-20T50-IQ • For grooving only Insert type: TIGER‑IQ Spare Parts Designation THDR/L 2525-10T20-IQ THDR/L 3232-10T20-IQ THDR/L 2525-12T20-IQ THDR/L 3232-12T20-IQ THDR/L 2525-14T20-IQ THDR/L 3232-14T20-IQ THDR/L 3232-16T40-IQ THDR/L 4040-16T50-IQ THDR/L 3232-18T40-IQ THDR/L...

Open the catalog to page 5

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 6

GROOVE TURN Blades Carrying Cartridges for Wide Grooving Inserts THBN Designation THBN 53K-10-IQ THBR/L 53K-12-IQ THBR/L 53K-14-IQ If D (workpiece) is smaller than 200 mm, then Tmax=98. If D (workpiece) is larger than 200 mm, then Tmax=93. Spare Parts Designation THBR/L/N-IQ Cartridges for Blades Carrying Wide Grooving Inserts l1 Spare Parts Designation CR THDR-...-IQ Torx Blade T-Handle BLD T15/S7

Open the catalog to page 6

New TIGER-IQ Heavy Duty Grooving Tools and Inserts - 7

GROOVE TURN Utility Inserts for External Heavy Grooving, Single-Ended for Deep Machining l Recommended Machining Data Designation TIGER 1008Y-IQ TIGER 1212Y-IQ TIGER 1415Y-IQ TIGER 1615Y-IQ TIGER 1820Y-IQ TIGER 2020Y-IQ IENT ANISM C EFFI MECH G CKIN

Open the catalog to page 7