Catalogs >
ISCAR Tools >
MULTI-MASTER brochure

MULTI-MASTER brochure
28Pages

Catalog excerpts

EXPANDING Your Milling Options WITH E NOW EABL NG XCHA HEADS E L STEE

MULTI-FUNCTIONAL MASTER The MULTI-MASTER was introduced by ISCAR in 2000. Originally a family of rotating tools with interchangeable cutting heads from solid carbide, it had a serious impact on the development of cutting tools. Now the family has a strong presence for manufacturing in various industrial sectors. In the MULTI-MASTER system, a solid carbide head is connected with a tool body (a shank) by a specially shaped thread. The success of the thread connection, in which the thread is produced directly on a solid carbide part, has changed pre-existing views on the reasonable...

Open the catalog to page 2

MULTI-MASTER, SHANK-MASTER and FLEXFIT Connection Options MILLING HEADS Features: • Modular system reduces MULTI-MASTER (MM) SHANK-MASTER (TS) FLEXFIT (M) stock cost by using the same head with different shank options. Enables machining with larger overhang. Same head can be mounted on metric and inch combinations.

Open the catalog to page 3

Indexable Insert Milling Heads Contents Indexable Insert Milling Heads Contents

Open the catalog to page 4

Indexable Solid Carbide Milling Heads For further information, refer to ISCAR SOLID CARBIDE & MULTI-MASTER ENDMILLS catalog Helix Angle Diameter Range High Speed Machining on aluminum High Speed Machining on aluminumDifferent helix CHATTERFREE FINISHRED CHATTERFREE Rough machining on aluminum Machining aluminum

Open the catalog to page 5

Indexable Solid Carbide Milling Heads For further information, refer to ISCAR SOLID CARBIDE & MULTI-MASTER ENDMILLS catalog Helix Angle Diameter Range Double chamfering General Finishing

Open the catalog to page 6

MULThlMI/.r:&)llh if/A USER GUIDE INDEXABLE SOLID CARBIDE LINE Clamping and Indexing Instructions Do not apply lubricant to the MULTI-MASTER threaded connection

Open the catalog to page 7

Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation ap • Do not apply lubricant to the MULTI-MASTER threaded connection (1) Clamping wrench size 90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts T • Do not apply lubricant to the MULTI-MASTER threaded connection (1) Clamping wrench size For inserts: HP ANCR 0702PNFR • HP ANKT/ANCT 0702..PN-R/PNTR • HP ANKW 070204PNTR . Spare Parts Designation HP E90AN-MM-07

Open the catalog to page 8

HELin/zwKSi • MULrl-M]/z\^)Dsoz 90° Endmills with MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts

Open the catalog to page 9

90° Endmills with MULTI-MASTER Threaded Adaptation Carrying HM90 AP.. 1003... Inserts T • Do not apply lubricant to the MULTI-MASTER threaded connection Clamping wrench size Spare Parts Designation HM90 E90A-MM-10 Multifunction Endmills with MULTI-MASTER Threaded Adaptation, which can Carry Several Insert Geometries TS • Do not apply lubricant to the MULTI-MASTER threaded connection • For undercutting use HTR inserts only. • The dimensions are for HCC inserts with r=0.5 mm (1) Clamping wrench size (should be ordered separately). For inserts: HCC-QF • HTR-QF . Spare Parts Designation HCE...

Open the catalog to page 10

Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges T • Do not apply lubricant to the MULTI-MASTER threaded connection • apmax=1.5 mm; Insert radius for programming r=1.9 mm Clamping wrench size (should be ordered separately). Spare Parts Designation FF EWX-MM-04 Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges T • Do not apply lubricant to the MULTI-MASTER threaded connection • Insert radius for programming r=1.9 mm (1) Clamping wrench size (should be ordered separately)....

Open the catalog to page 11

Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges T Rd° • Do not apply lubricant to the MULTI-MASTER threaded connection Clamping wrench size Spare Parts Designation H400 ER-MM Rough Profiling Tools with a MULTI-MASTER Adaptation T Rd° • Do not apply lubricant to the MULTI-MASTER threaded connection (1) Clamping wrench size For insert: RCMT/RCCT-MO • RCMT/RCMW/RCCW-FW • RCMW/RCCW-MO . Spare Parts Designation ERW-MM Torx Blade

Open the catalog to page 12

Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts T • Do not apply lubricant to the MULTI-MASTER threaded connection Diameter D according to insert corner radius r=1.0 mm Clamping wrench size Diameter Change According to Insert Radius R D Spare Parts Designation E93CN-MM Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation T • Do not apply lubricant to the MULTI-MASTER threaded connection • The dimensions are for HBR inserts. (1) Clamping wrench size For inserts: HBF-QF • HBR-QF • HCD-QF • HCR . Spare Parts Designation HCM D12/.50-MMT08 HCM...

Open the catalog to page 13

Ball Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Tangent Straight Edge Inserts for Finish Profiling T(1) D r • Do not apply lubricant to the MULTI-MASTER threaded connection (1) Clamping wrench size Spare Parts Designation BCM D12-MMT08 BCM D16-MMT10 BCM D20-MMT12 BCM D25-MMT15-C Torx Blade

Open the catalog to page 14

Stepped Cylindrical Shanks for Interchangeable Milling Heads MM S-A-L...-H Tsi d

Open the catalog to page 15

Cylindrical Shanks for Interchangeable Milling Heads • Do not apply lubricant to the threaded connection Solid Carbide Cylindrical Shanks for Interchangeable Milling Heads Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision. Each shank is supplied with MM EGR clamping key. Keys for other milling heads must be ordered separately. Spare Parts Designation MM GRT-095-T06 MM GRT-100-T06 MM GRT-120C-T08 MM GRT-127C-T08

Open the catalog to page 16

INDEXABLE SOLID CARBIDE LINE Shanks for Interchangeable Milling Heads • Shank material (Shank in.): S-steel, W-tungsten. • Do not apply lubricant to the threaded connection.

Open the catalog to page 17

89° Conical Shanks for Interchangeable Milling Heads • Shank material (Shank m.): S-steel, C-carbide, W-tungsten. • Do not apply lubricant to the threaded connection.

Open the catalog to page 18

INDEXABLE SOLID CARBIDE LINE MULTI-MASTER Shank Extensions • Do not apply lubricant to the threaded connection. (1) Inch size spanners (displayed in mm)

Open the catalog to page 19