Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. ISCAR Tools
  3. ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT
video corpo

ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT

ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT
1 / 1 PageView full catalog

ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT

Product catalog summary
Overview: This document provides specifications for ISCAR's Positive 7˚ Inserts designed for aluminum machining, specifically focusing on the AS Chipformer series. The inserts are categorized under two main designations: SCGT and TCGT.
Specifications:
  • SCGT Inserts:
    • SCGT 09T308-AS: Length 9.52 mm, Diameter 9.52 mm, Thickness 3.97 mm, Hole Diameter 4.4 mm, Corner Radius 0.4 mm.
    • SCGT 120408-AS: Length 12.7 mm, Diameter 12.7 mm, Thickness 4.76 mm, Hole Diameter 5.5 mm, Corner Radius 0.8 mm.
  • TCGT Inserts:
    • TCGT 110204-AS: Length 11.0 mm, Diameter 6.35 mm, Thickness 2.38 mm, Hole Diameter 2.8 mm, Corner Radius 0.4 mm.
    • TCGT 16T304-AS: Length 16.5 mm, Diameter 9.525 mm, Thickness 3.97 mm, Hole Diameter 4.4 mm, Corner Radius 0.4 mm.
    • TCGT 16T308-AS: Length 16.5 mm, Diameter 9.525 mm, Thickness 3.97 mm, Hole Diameter 4.4 mm, Corner Radius 0.8 mm.
Additional Information:
  • Toolholders for these inserts can be found on pages G49-50 and G90-92.
  • Machining conditions are detailed on pages G264-265.
See more

Catalog excerpts

ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT-1

Designation ldsd > 1 r SCGT 09T308-AS 9.529.523.974.40.4 SCGT 120408-AS 12.712.74.765.50.8 > Designation ldsd > 1 r TCGT 110204-AS 11.06.352.382.80.4 TCGT 16T304-AS 16.59.5253.974.40.4 TCGT 16T308-AS 16.59.5253.974.40.8 For toolholders, see pages G49-50, G90-92.For machining conditions, see pagesG264-265. For toolholders, see pages G47-48.For machining conditions, see pages G264-265. >

 Open the catalog to page 1

All ISCAR Tools catalogs and technical brochures

  1. New products catalog
    New products catalog

    2  Pages

  2. PARTING, GROOVE-TURN, THREADING, TOOLING
    PARTING, GROOVE-TURN, THREADING, TOOLING

    24  Pages

  3. ITSBORE
    ITSBORE

    6  Pages

  4. SWISS-CUT
    SWISS-CUT

    9  Pages

  5. CUT-GRIP
    CUT-GRIP

    7  Pages

  6. X-STREAM SHRINKIN
    X-STREAM SHRINKIN

    7  Pages

  7. Non-Rotating Tool Lines
    Non-Rotating Tool Lines

    628  Pages

  8. Complete Machining Solutions Non-Rotating Tool Lines
    Complete Machining Solutions Non-Rotating Tool Lines

    628  Pages

  9. Engineered for MAXIMUM Precision Grooving and Threading
    Engineered for MAXIMUM Precision Grooving and Threading

    40  Pages

  10. Flashline eco line
    Flashline eco line

    80  Pages

  11. Railway industry_2017
    Railway industry_2017

    38  Pages

  12. Welcome to ISCAR world
    Welcome to ISCAR world

    64  Pages

  13. Industrealize Industries
    Industrealize Industries

    92  Pages

  14. Machining Solutions for Down the Hole Rock Bits
    Machining Solutions for Down the Hole Rock Bits

    8  Pages

  15. TANG-GRIP IQ
    TANG-GRIP IQ

    40  Pages

  16. FLASHTURN
    FLASHTURN

    28  Pages

  17. DO-CUT. Deeper Cheaper Cut
    DO-CUT. Deeper Cheaper Cut

    4  Pages

  18. CFRP Machining
    CFRP Machining

    4  Pages

  19. Maximum Economical Turning Performance
    Maximum Economical Turning Performance

    318  Pages

  20. ISCAR INdustry
    ISCAR INdustry

    24  Pages

  21. catalog 2015
    catalog 2015

    324  Pages

  22. Quick Change High Precision Tools and Holders
    Quick Change High Precision Tools and Holders

    148  Pages

  23. MULTI-MASTER milling tool
    MULTI-MASTER milling tool

    28  Pages

  24. chamfering drill brochure
    chamfering drill brochure

    12  Pages

  25. FACE GROOVE-TURN TOOLS
    FACE GROOVE-TURN TOOLS

    128  Pages

  26. Solid Carbide Chamfering tool
    Solid Carbide Chamfering tool

    12  Pages

  27. Solutions for the bearing industries
    Solutions for the bearing industries

    36  Pages

  28. Solutions for the Dies and Molds industries
    Solutions for the Dies and Molds industries

    32  Pages

  29. Solutions for the automotive industries
    Solutions for the automotive industries

    36  Pages

  30. Solution for the aerospace industries
    Solution for the aerospace industries

    32  Pages

  31. Solutions for machine tool builders
    Solutions for machine tool builders

    16  Pages

  32. Solution for the medical industries
    Solution for the medical industries

    10  Pages

  33. Solution for the miniature parts industries
    Solution for the miniature parts industries

    20  Pages

  34. JET HP Line
    JET HP Line

    60  Pages

  35. Composite materials
    Composite materials

    12  Pages

  36. Heat Exchanger
    Heat Exchanger

    28  Pages

  37. Wind power industry
    Wind power industry

    44  Pages

  38. Power generation
    Power generation

    1  Page

  39. MULTI-MASTER brochure
    MULTI-MASTER brochure

    28  Pages

  40. Solid Carbide & MULTI-MASTER Endmills
    Solid Carbide & MULTI-MASTER Endmills

    185  Pages

  41. Milling systems
    Milling systems

    593  Pages

  42. Hole Making Tools
    Hole Making Tools

    449  Pages

  43. New Cost Saving Double-Sided Parting Inserts
    New Cost Saving Double-Sided Parting Inserts

    5  Pages

  44. New HD Chipbreaker for Drilling Low Carbon Steel
    New HD Chipbreaker for Drilling Low Carbon Steel

    6  Pages

  45. New TIGER-IQ Heavy Duty Grooving Tools and Inserts
    New TIGER-IQ Heavy Duty Grooving Tools and Inserts

    7  Pages

  46. Highly Rigid Profiling Tools for Accurate Contours
    Highly Rigid Profiling Tools for Accurate Contours

    8  Pages

  47. Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools
    Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools

    9  Pages

  48. MFHR-JHP Square Shank Face Grooving Tools
    MFHR-JHP Square Shank Face Grooving Tools

    3  Pages

  49. FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges
    FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges

    5  Pages

  50. Another Expansion of the MULTI-MASTER Product Range
    Another Expansion of the MULTI-MASTER Product Range

    9  Pages

  51. Expansion of the HELIIQMILL 390 Line with Tools Carrying 07 mm Edged Inserts
    Expansion of the HELIIQMILL 390 Line with Tools Carrying 07 mm Edged Inserts

    9  Pages

  52. YNMG A New 25º Rhombic Negative Insert
    YNMG A New 25º Rhombic Negative Insert

    9  Pages

  53. Expanding the Family with JHP SWISSTURN Toolholders
    Expanding the Family with JHP SWISSTURN Toolholders

    10  Pages

  54. Flat Top Economical Blades with 4 Pockets and Shank Tools with 2 Pockets
    Flat Top Economical Blades with 4 Pockets and Shank Tools with 2 Pockets

    6  Pages

  55. New P and M Chipformers for TNF Face Grooving Inserts
    New P and M Chipformers for TNF Face Grooving Inserts

    6  Pages

  56. TANG-GRIP and DO-GRIP
    TANG-GRIP and DO-GRIP

    11  Pages

  57. New Profile Milling Heads with MULTI-MASTER T15 Adaptation
    New Profile Milling Heads with MULTI-MASTER T15 Adaptation

    11  Pages

  58. CHATTERFREE and Chip Splitting
    CHATTERFREE and Chip Splitting

    3  Pages

  59. SD-SP15 New T-Slot Cutters with a Unique Spline Connection
    SD-SP15 New T-Slot Cutters with a Unique Spline Connection

    6  Pages

  60. ECI-H4/5R-CF Variable Helix and CHATTERFREE Endmills
    ECI-H4/5R-CF Variable Helix and CHATTERFREE Endmills

    6  Pages

  61. MULTI-MASTER INDEXABLE
    MULTI-MASTER INDEXABLE

    28  Pages

  62. Expansion of the MILLSHRED Family
    Expansion of the MILLSHRED Family

    9  Pages

  63. TANG-GRIP
    TANG-GRIP

    40  Pages

  64. FLASH-TURN
    FLASH-TURN

    28  Pages

  65. Chamfering Drills Brochure
    Chamfering Drills Brochure

    12  Pages

  66. IQ New Products
    IQ New Products

    184  Pages

  67. GrooveTurn
    GrooveTurn

    372  Pages

Archived catalogs

  1. Parting&Grooving
    Parting&Grooving

    5  Pages

  2. THREADING
    THREADING

    5  Pages

  3. MILLING
    MILLING

    11  Pages

  4. COMBICHAM_2018
    COMBICHAM_2018

    5  Pages

  5. TURNING & THREADING TOOLS
    TURNING & THREADING TOOLS

    466  Pages

  6. TOOLHOLDING SYSTEMS
    TOOLHOLDING SYSTEMS

    318  Pages

  7. Turning & Threading Tools_2012
    Turning & Threading Tools_2012

    465  Pages

  8. Toolholding Systems_2012
    Toolholding Systems_2012

    337  Pages

  9. Railway Industry
    Railway Industry

    12  Pages

  10. Combicham
    Combicham

    4  Pages

  11. A New Rough Milling Insert for E90CN Tools
    A New Rough Milling Insert for E90CN Tools

    5  Pages

  12. A New Family of Face Mills for a Wide Range of Applications
    A New Family of Face Mills for a Wide Range of Applications

    8  Pages

  13. Expansion of HELIDO H490 Extended Flute Cutters
    Expansion of HELIDO H490 Extended Flute Cutters

    11  Pages

  14. HELIDO H490 75° Face Mill
    HELIDO H490 75° Face Mill

    3  Pages

  15. FF SOF - A New Economical Solution for High Feed Milling Applications
    FF SOF - A New Economical Solution for High Feed Milling Applications

    3  Pages

  16. SUMOMILL T290 Extended Flute Shell Mill Cutter
    SUMOMILL T290 Extended Flute Shell Mill Cutter

    4  Pages

  17. Expansion of the HELI2000 Family
    Expansion of the HELI2000 Family

    7  Pages

  18. HELITANG T490 Inserts for Ramping Down Applications
    HELITANG T490 Inserts for Ramping Down Applications

    3  Pages

  19. Expansion of HELITANG T490 Extended Flute Cutters
    Expansion of HELITANG T490 Extended Flute Cutters

    14  Pages

  20. A New Combination of FEEDMILL for HELIDO H490-09 Insert
    A New Combination of FEEDMILL for HELIDO H490-09 Insert

    3  Pages

  21. Expansion of the MINI-TANGSLOT Cutter Family
    Expansion of the MINI-TANGSLOT Cutter Family

    11  Pages

  22. New HELITANG T490 Chip Splitting Inserts
    New HELITANG T490 Chip Splitting Inserts

    4  Pages

  23. Expansion of the HELIDO H490-17 Family
    Expansion of the HELIDO H490-17 Family

    3  Pages

  24. EC-H5M-CFR Variable 5 Helix and CHATTERFREE Endmills
    EC-H5M-CFR Variable 5 Helix and CHATTERFREE Endmills

    4  Pages

  25. Expansion of the MILLTHREAD Line
    Expansion of the MILLTHREAD Line

    10  Pages

  26. HELIFACE Precision Machining Basic applications with various tools
    HELIFACE Precision Machining Basic applications with various tools

    1  Page

  27. DCM INDEXABLE HEAD DRILLS DCM
    DCM INDEXABLE HEAD DRILLS DCM

    4  Pages

  28. PICCO Solid Carbide Mini Boring Bars Metric
    PICCO Solid Carbide Mini Boring Bars Metric

    3  Pages

  29. PICCO Solid Carbide Mini Boring Bars • Inch
    PICCO Solid Carbide Mini Boring Bars • Inch

    3  Pages

  30. HM90 E90A Long-Reach EndMills Diameter Range .38-1.50 HM90 E90A-XL
    HM90 E90A Long-Reach EndMills Diameter Range .38-1.50 HM90 E90A-XL

    2  Pages

  31. HM90 E90A-D-M HM90 E90AD-D-M
    HM90 E90A-D-M HM90 E90AD-D-M

    1  Page

  32. ISCAR Drilling Equipment, Drill Types and Diameter Ranges
    ISCAR Drilling Equipment, Drill Types and Diameter Ranges

    15  Pages

  33. ISCAR WG for High-Feed Finishing • • • • -GN -WG -GN -WG GN WG
    ISCAR WG for High-Feed Finishing • • • • -GN -WG -GN -WG GN WG

    2  Pages

  34. HeliFace Tools
    HeliFace Tools

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.