ISCAR Drilling Equipment, Drill Types and Diameter Ranges CYLINDRICAL DRILLS 3-20ؘ7.5-20.9 16-60ؘ23-55 DRILLS WITH FLANGED SHANKS PROFILING TOOLS > CHAMDRILL CHAMDRILLJET 7.5-25.9 ؘ8-25.99 > PICCO-MF/MFTRING DCMDCTCHAMRING DZ DRILLDR DRILL UNICHAMDRILLSOLIDDRILL Drilling, Internaland External Turning, Internal and External ThreadingChamfering Ringsfor Drilling and ChamferingFor 3/8-7/8 UNC/UNFPre-thread Holders 6.8-ؘ21 for M8-M24ChamferingRings for Drilling and Chamfering size="-1">

SPECIALY TAILORED - Drilling Tools Upon Request BACK TO MAIN PAGE> >

SCD Ŕ ( S olid C arbide D rill) ӓSCD drills: m7 drill diameter tolerance, shanks according to DIN 6535 standard, for ISO P materials with 30԰ flute helix and 140 head point angle, reinforced web thickness and standard web taper. ГSCDR drills: DIN 1420 standard to H7 hole accuracy, shanks according to DIN 6535 standard, for ISO K materials (ferritic only), with straight flute and 140԰ head point angle, reinforced web thickness. Range of 3-20 mm in length to diameter ratio of 3xD & 5xD. ՕRight-hand cut with and without internal coolant nozzles. IC08 submicron substrate. ՕMost advanced TiAlN coating...

ISCAR has introduced a new family designated UNICHAMDRILL.This new family follows the familiar CHAMDRILL but is produced without a flange (round cylindrical body). The diameter range of the UNICHAMDRILL family ranges from 7.5 to 20 mm. UNICHAMDRILL have up to 3.5 drilling depth-to-diameter ratio.The new UNICHAMDRILL uses standard CHAMDRILL drilling heads. The flute angle of the UNICHAMDRILL differs from that of thestandard CHAMDRILL in order to compensate for the lack of the conventional flange face contact support. The UNICHAMDRILLs with diameters under 10 mm have a straight flute design, like...

Carbide Drill Heads, Twist Drill This revolutionary drill features ISCAR's unique "quick change" system. Precise, carbide drill heads can be changed (indexed) using a special key and a simple twist while the drill body remains clamped in the machine. The simple connection combines an elastic steel body with a hard carbide working end. ISCAR has eliminated set-up time for indexing so you can cut more holes. Diameter Range: 7.5mm-ؘ25.9mm (.??? - .???Ԕ) Drilling Depth: 3xD, 5xD BACK TO MAIN PAGE> >

IDK IDN For use on cast iron (ISO K). The drill head is designedwith a honed cutting edge and two peripheral chamfers. ֕ For use on aluminum (ISO N). The drill head ismanufactured with a sharp cutting edge and polished flutes. IDM CHAMDRILLJET ֖ For use on stainlesssteel and high temperature alloys (ISO M). The drill head features a T-land on the cutting edge. drill heads have 30հ holes for the mostefficient flushing of the cutting edge. The geometries of the heads were designed according to the material to be cut, to provide optimal chip evacuation, drilling head life, surface finish and reliability....

CHAMDRILL family. CHAMDRILLJET drill heads cover the diameter rangeof 8 to 25.9 mm. IDK drill head geometry is currently available inwhole and mid-sizes. Other intermediate dimensions will be added according to market demand. IDP, IDM and IDN drill head geometries are available in 0.1 mm drill diameter increments. Drill Bodies Initially CHAMDRILLJET drill bodies will be available in thediameter range of 8 to 25.0 mm diameters, in whole sizes. Their drilling depth-to-diameter ratios are 3xD and 5xD. All drill bodies have helical internal coolant holes that coincide with the holes in the drill...

DR Drill Inserts, Soft Cut DR Drills carry HELIQUAD inserts with high positive angles. The DT chipformer design, with its high positive axial angle, controls chip flow and gives a soft cut with excellent surface quality. > FourCutting EdgesSuper Positive withTwo Cutting EdgesFourCutting Edges Diameter Range: 16mm-ؘ60mm (.??? - .???Ԕ) Drilling Depth: 2xD, 3xD, 4xD BACK TO MAIN PAGE> >

Drilling, DZ Drill Types and Diameter Range Chip splitter for uninterrupted drilling at highest feed rates. Diameter Range: 23mm-ؘ55mm (.937 - 2.125Ԕ) Drilling Depth: 2.5xD, 3xD, 4xD BACK TO MAIN PAGE> >

ISCAR is introducing new, revolutionary, multifunction solid carbidetools for the PASSPORT Line. The new tools, designated PICCO MF , will especially benefit theminiature parts industries by reducing their tooling costs. The new PICCOMFwas designed in particular for use on Swiss-type machines and all other machines that produce miniature parts. This family of tools provides a unique cutting geometry and machining abilities that combine the work of a few tools into one. NEXT PAGE> >

PICCOMFincludes two types of tools for different applications theMFMulti-Function and the MFTMulti-Function with Threading.MF (Multi-Function)The ֓MF tools are designed for all of the following applications: ԕDrilling Face Turning ՕInternal Chamfering Internal Turning / Boring ՕInternal Profiling External Chamfering Օ External TurningMFT (Multi-Function & Threading)The MFTӔ tools perform all of the following applications: Drilling ՕFace Turning Internal Chamfering ՕInternal Turning / Boring Internal Profiling ՕInternal 60 Threading(right-and left-hand)ЕExternal Chamfering External Turning ՕExternal...

Metal Chamfering Tools, Chamfering Rings The ISCAR CHAMDRILL Line is now available with add-on chamfering rings for use on DCM drills. The chamfering rings are adjustable for height location and may be used for a maximum chamfer size of 45 x 1.5 mm (.06"). They are available for drills in the 10 to 20 mm (.394 to .787") range. BACK TO MAIN PAGE> >

The PRE-THREAD DCT CHAMDRILL In addition to standard drilling applications, the revolutionary self-clamping CHAMDRILL mechanism is an excellent solution for special drilling requirements. Pre-thread hole drilling is very popular in many industries. Available are drills designed for M8 to M24 ISO M standard pre-thread holes.The new DCT drills carry two standard chamfering insertsdesignated AOMT 060204-45DT IC508, symmetrically mounted and cutting forces are balanced for optimal performance. This feature is essential in through hole application.Counter boring may be performed, however it is limitedto...