Catalogs >
ISCAR Tools >
Hole Making Tools

Hole Making Tools
449Pages

Catalog excerpts

HOLE MAKING TOOLS HOLE MAKING TOOLS Metric Version Catalog 2012 HOLE MAKING TOOLS Metric Version Catalog 2012 Metric Version Catalog 2012 WWW.ISCAR.COM WWW.ISCAR.COM

Open the catalog to page 1

A INTRODUCTION INDEXABLE DRILLS • • • • SUMOCHAM CHAMDRILL DR-TWIST Multifunction Tools B Premium Solid Carbide Drills C Deep Hole Drilling Solutions D • GUN DRILLS D60 reamers E ITSBORE Modular Boring System F Materials and Grades G INDEX H The Ultimate Expert in Selecting the Best Tool A1

Open the catalog to page 2

INTRODUCTION SUMOCHAM SUMOCHAM Drills for Hole Making ISCAR’s SUMOCHAM drill family is the next evolution of the very successful CHAMDRILL and CHAMDRILLJET families. The SUMOCHAM family has similar features, with improved head and pocket design, no setup time, Fast Metal Removal and economical indexing. The SUMOCHAM comprises a revolutionary clamping that enables improved productivity output rates, while enabling more insert indexes. Steel A2 ISCAR Stainless Steel The drill body features twisted coolant holes and exhibits a durable and stably constructed body. The indexable heads are...

Open the catalog to page 3

INTRODUCTION DR-TWIST Drills with Twisted Coolant Holes The DR-TWIST drills use 6 sizes of square inserts with 4 cutting edges. They feature twisted coolant holes. The coolant holes do not pass through the center core of the drill and therefore the drill is strong and highly resistant to torsion. The flute design leaves much room for the chips to flow out of the hole uninterrupted. The DR-TWIST drills are available in a drilling depth to diameter ratio of 2xD, 3xD, 4xD and 5xD and in a diameter range of 12 to 60 mm. They are available in whole metric sizes as well as half sizes in the...

Open the catalog to page 4

INTRODUCTION SUMOCHAM Large Diameter DR-TWIST Drills ISCAR's family of 61 to 80 mm large diameter range is an extension of the 12 to 60 mm range. This family features a drill body that carries cartridges with square inserts. The inserts are available with two chipformer types and in the following grades: IC808/908 for low alloy steel, stainless steel and high temperature alloys. IC8080, which is recommended for high speed drilling of cast iron and steel, should be used for the peripheral insert. A4 ISCAR • Each drill is supplied with a set of shim plates used to change the drill’s diameter....

Open the catalog to page 5

INTRODUCTION SUMOCHAM An Interchangeable Reaming Head System ISCAR's BAYO T-REAM is a high speed reaming system. In comparison to the conventional method, this advanced solution allows for increasing the feeds dramatically. This feature is most advantageous in mass production industries. When large quantities of workpieces are involved, the savings in machining time, labor cost and productivity are multiplied greatly. The BAYO T-REAM consists of an interchangeable carbide reaming head with a unique quick-change bayonet mechanism, suitable for reaming applications of H7 hole tolerance range....

Open the catalog to page 6

INTRODUCTION DR-DH Deep Drills for Milling Centers and Lathe Machines These long drills for a drilling depth-to-diameter ratio of 7XD and up, may be used on standard horizontal milling centers, turning, and multi-task machines. Use of supplementary machine and setup can be avoided. The new drills can be used with the existing adaptations, not requiring any special coolant pressure or extra pump capacity. DR-DH drills are available as semi-standard items upon requsest in the diameter range of 25.4 to 69.5 mm. A6 ISCAR Features • High feed drilling: up to 0.35 mm/rev for high productivity •...

Open the catalog to page 7

Page SUMOCHAM COMBICHAM B18 CHAMDRILL B39 DR-TWIST B54 DZ-DRILLS B65 DR-DH Semi-Standard Deep Drills B84 Chamfering Drills B91 Multifunction tools B2 B4 B99 ISCAR

Open the catalog to page 9

CHAMDRILL LINE Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD • For user guide and cutting conditions, see pages B22-38 [1J Do not mount smaller drilling heads than specified range for drill body. Standard Tools

Open the catalog to page 11

CHAMDRILL LINE Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD • For user guide and cutting conditions, see pages B22-38. (1) Do not mount smaller drilling heads than specified range for drill body.

Open the catalog to page 13

CHAMDRILL LINE Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 3xD • For user guide and cutting conditions, see pages B22-38. (1J Do not mount smaller drilling heads than specified range for drill body.

Open the catalog to page 14

CHAMDRILL LINE Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD • For user guide and cutting conditions, see pages B22-38. W Do not mount smaller drilling heads than specified range for drill body.

Open the catalog to page 17

ICP \ICM\ICK\ICN Exchangeable DCN Drill Heads 140º D Designation S Pocket Size ICP ... ICM ... ICK ... ICN ... IC08 • • • • D(1) 6.0-6.4 6.5-6.9 7.0-7.9 8.0-8.9 9.0-9.9 10.0-10.9 11.0-11.9 12.0-12.9 13.0-13.9 14.0-14.9 15.0-15.9 16.0-16.9 17.0-17.9 18.0-18.9 19.0-19.9 20.0-20.9 21.0-21.9 22.0-22.9 23.0-23.9 24.0-24.9 25.0-25.9 26.00-26.9 27.00-27.9 28.00-28.9 29.00-29.9 30.00-30.9 31.00-31.9 32.00-32.9 4.00 4.30 4.60 5.40 5.80 6.20 6.60 7.00 7.60 8.15 8.73 9.30 9.90 10.50 11.00 11.60 12.20 12.80 13.40 14.00 14.50 15.30 16.20 17.00 17.90 18.70 19.60 20.40 6.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0...

Open the catalog to page 22

ICP-2M \ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish 140º D S Designation ICP-2M... ICK-2M... D S Pocket Size 7.00-7.90 8.00-8.90 9.00-9.90 10.00-10.90 11.00-11.90 12.00-12.90 13.00-13.90 14.00-14.90 15.00-15.90 16.00-16.90 17.00-17.90 18.00-18.90 19.00-19.90 20.00-20.90 21.00-21.90 22.00-22.90 23.00-23.90 24.00-24.90 25.00-25.90 4.60 5.40 5.80 6.20 6.60 7.00 7.60 8.15 8.73 9.30 9.90 10.50 11.00 11.60 12.20 12.80 13.40 14.00 14.50 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 IC908 Dimensions l l l l l l l l l l l l...

Open the catalog to page 23

Large Diameter Indexable Drills with Integral Pilot Drills and One Flat Shanks, • Hole tolerance: D+0.10/-0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions. • For user guide and cutting conditions, see pages B30-31. (1) Outer insert (2) Central insert For inserts, see: ICP (B15) • SOGT-W (B20) • SOGX-W (B20).

Open the catalog to page 25