Catalogs >
ISCAR Tools >
Highly Rigid Profiling Tools for Accurate Contours

Highly Rigid Profiling Tools for Accurate Contours
8Pages

Catalog excerpts

Highly Rigid Profiling Tools for Accurate Contours

Highlights ISCAR’s new SDNCN …-13-SL and SDJCN …-13-SL screw lock toolholder for 55° diamond inserts with a 7° clearance angle has a long groove on the pocket and a matching ridge at the insert bottom, which ensures high rigidity in profiling applications. Standard Tool SAFE-T-LOCK Tool The new design ensures high edge location precision after indexing and no backlash when changing machining direction as required in profiling applications. Click Link to See Short Video

Open the catalog to page 2

Highly Rigid Profiling Tools for Accurate Contours - 3

DCMT 13T5..-F3P-SL - 55° rhombic positive flank inserts with a new F3P chipformer were designed for semi-finishing and finishing of steel. Available in grades IC8150 and IC8250. DCMT 13T5..-M3M-SL - 55° rhombic positive flank inserts with a new M3M chipformer were designed for semi-finishing and medium machining conditions on stainless and low carbon steel. Available in grades IC6015 and IC6025. DCMT 13T5..-SM-SL and DCMT 13T5..-PF-SL Apart from the new F3P and M3M chipformers, ISCAR is introducing the same insert geometry with the widely used SM and PF chipformers on the standard DCMT...

Open the catalog to page 3

Highly Rigid Profiling Tools for Accurate Contours - 4

TEST Report Vc = 180 m/min Fz = 0.2 mm/rev ap = 2.5 mm Standard DCMT 11T3… SAFE-T-LCOK DCMT 13T5… SL The unique clamping design enables machining at high chip load, thus reducing machining cycle time while maintaining high profile accuracy. The new tools are available in 16, 20 and 25 mm shanks. The combination of the highly rigid clamping system, new chipformers and most advanced carbide grades, provide the ultimate solutions for precision profiling applications.

Open the catalog to page 4

Highly Rigid Profiling Tools for Accurate Contours - 5

55° Rhombic Positive Flank Inserts with a Locating Bottom Ridge, for Semi-Finishing and Finishing of Steel Bottom view Designation DCMT 13T504-F3P-SL DCMT 13T508-F3P-SL Ground surface for high rigidity and accuracy Unique deflector for chip control at low cutting conditions Positive rake angle for smooth cutting and reducing cutting forces Wavy surface to prevent chip hammering DCMT 13T504-F3P-SL Application Range Recommended Machining Data

Open the catalog to page 5

Highly Rigid Profiling Tools for Accurate Contours - 6

55° Rhombic Positive Flank Inserts with a Locating Bottom Ridge, for Machining Stainless and Low Carbon Steel Designation DCMT 13T508-M3M-SL DCMT 13T512-M3M-SL Unique deflector design Strong radius Reinforced cutting edge prevents notch wear Positive rake angle for smooth cutting and reducing cutting forces DCMT 13T508-M3M-SL Application Range Recommended Machining Data f

Open the catalog to page 6

Highly Rigid Profiling Tools for Accurate Contours - 7

55° Rhombic Positive Flank Inserts with a Locating Bottom Ridge, for Finish Turning on Soft Materials and Exotic Alloys Recommended Machining Data Designation DCMT 13T504-SM-SL DCMT 13T508-SM-SL 55° Rhombic Positive Flank Inserts with a Locating Bottom Ridge, for Finish Turning on Soft Materials and Exotic Alloys Recommended Machining Data Designation DCMT 13T504-PF-SL DCMT 13T508-PF-SL

Open the catalog to page 7

Highly Rigid Profiling Tools for Accurate Contours - 8

Screw Lock Toolholders for 55° Diamond Inserts with 7° Clearance Angle, High Rigidity in Profiling Applications Designation SDNCN 1616H-13-SL SDNCN 2020K-13-SL SDNCN 2525M-13-SL Spare Parts Designation SDNCN-13-SL Screw Lock Toolholders for 55° Diamond Inserts with 7° Clearance Angle, High Rigidity in Profiling Applications Designation SDJCR/L 1616H-13-SL SDJCR/L 2020K-13-SL SDJCR/L 2525M-13-SL Right-hand shown DCMT 13T5-SL DCMT 13T5-SL DCMT 13T5-SL • Insert clamping torque 3 Nxm Spare Parts Designation SDJCR/L-13-SL

Open the catalog to page 8