FLASH-TURN
28Pages

{{requestButtons}}

Catalog excerpts

FLASH-TURN - 1

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Maximum Economical Turning Performance TI FFEC E COST ROACH APP TURNING LINE

Open the catalog to page 1
FLASH-TURN - 2

Small Size Cost Saving Inserts In many turning applications, people tend to use larger inserts than are actually required for the machining parameters being applied. To fill the niche, ISCAR is introducing a wide range of ISOTURN small sized inserts, which provide an economical advantage per cutting edge. inserts in WNMX, CNMX and TNMX geometries. These inserts, like their larger counterparts, have high positive radial helical cutting edges and positive rake angles, which is a combination that substantially reduces cutting forces and thus enables machining at higher cutting loads. The new...

Open the catalog to page 2
FLASH-TURN - 3

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P The 3/8” inscribed circle FLASHTURN inserts can cover about 75% of turning applications, as the most popular D.O.C. range is between 1 to 3 mm. Tool life (min) Therefore, small sized inserts can handle this machining range, reducing costs, when compared to the 1/2” inscribed circle larger inserts being widely used in such applications. Tool Life vs. Insert Size Material: SAE4340 Coolant: emulsion Cutting conditions: When 3 to 6 mm D.O.C. is required, the 1/2” inscribed circle insert size should be used. Depth of Cut vs....

Open the catalog to page 3
FLASH-TURN - 4

Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications

Open the catalog to page 4
FLASH-TURN - 5

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Trigon Double-Sided Inserts for Machining Stainless and Low Carbon Steel Designation WNMG 060404-M3M WNMG 060408-M3M WNMG 060412-M3M Recommended Machining Data Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications Designation WNMG 06T301-NF WNMG 06T302-NF WNMG 06T304-NF WNMG 06T308-NF WNMG 060402-NF WNMG 060404-NF WNMG 060408-NF Recommended Machining Data

Open the catalog to page 5
FLASH-TURN - 6

Double-Sided Trigon Inserts for General Applications Recommended Machining Double-Sided Trigon Inserts for Machining Very Ductile Materials at Medium Cutting Conditions

Open the catalog to page 6
FLASH-TURN - 7

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Double-Sided Trigon Inserts for Super Finishing Designation WNMG 06T302-SF WNMG 06T304-SF Recommended Machining Data Double-Sided Trigon Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions Recommended Machining Data Designation WNMG 06T304-TF WNMG 06T308-TF WNMG 06T312-TF WNMG 060404-TF WNMG 060408-TF WNMG 060412-TF

Open the catalog to page 7
FLASH-TURN - 8

Double-Sided Trigon Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves

Open the catalog to page 8
FLASH-TURN - 9

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Double-Sided Trigon Wiper Inserts for High Surface Finish at High Feed Turning Designation WNMG 06T304-WG WNMG 06T308-WG WNMG 060404-WG WNMG 060408-WG Recommended Machining Data Double-Sided Trigon Inserts with High Helical Cutting Edge for High Metal Removal Rates Designation WNMX 060604-M3PW WNMX 060608-M3PW Recommended Machining Data

Open the catalog to page 9
FLASH-TURN - 10

Double-Sided Trigon Inserts for Machining Stainless Steel, High Temperature Alloys and Soft, Low Carbon Steel Designation WNMX 060604-M4MW WNMX 060608-M4MW Recommended Machining Data

Open the catalog to page 10
FLASH-TURN - 11

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Double-Sided Trigon Inserts for Short Chipping Materials such as Cast Iron Designation WNMA 06T304 WNMA 06T308 WNMA 06T312 WNMA 060404 WNMA 060408 Recommended Machining Data

Open the catalog to page 11
FLASH-TURN - 12

Lever Lock External Turning Toolholders for Negative HELITURNLD Trigon Inserts Right-hand shown Designation PWLNR/L 2020K-06X PWLNR/L 2525M-06X WNMX 0606 WNMG 0604 WNMX 0606 WNMG 0604 Spare Parts Designation PWLNR/L 2020K-06X PWLNR/L 2525M-06X

Open the catalog to page 12
FLASH-TURN - 13

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications Designation CNMG 090404-F3P CNMG 090408-F3P Recommended Machining Data Double-Sided 80° Rhombic Inserts for Medium Machining Conditions on Steel Recommended Machining Data Designation CNMG 090404-M3P CNMG 090408-M3P Double-Sided 80° Rhombic Inserts for Machining Stainless and Low Carbon Steel Designation CNMG 090404-M3M CNMG 090408-M3M Recommended Machining Data

Open the catalog to page 13
FLASH-TURN - 14

Double-Sided 80° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates Designation CNMX 090604-M3PW CNMX 090608-M3PW Recommended Machining Data Double-Sided 80° Rhombic Inserts with High Helical Cutting Edge, for High Metal Removal Rates of Stainless Steel Designation CNMX 090604-M4MW CNMX 090608-M4MW Recommended Machining Data

Open the catalog to page 14
FLASH-TURN - 15

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Lever Lock Toolholders for CNMX-M3PW HELITURNLD 80° Rhombic Inserts Right-hand shown CNMX 0906 CNMG 0904 CNMX 0906 CNMG 0904 Supplied with TCX 3 seat for CNMX 0904.. inserts. For CNMG 0904.. inserts, use TCN 323 optional seat. Spare Parts Designation PCLNR/L 2020K-09X PCLNR/L 2525M-09X

Open the catalog to page 15
FLASH-TURN - 16

Double-Sided Square Inserts for Semi-Finishing and Finishing of Steel Recommended Machining Data Double-Sided Square Inserts for Medium Machining Conditions on Steel Designation SNMG 090404-M3P SNMG 090408-M3P Recommended Machining Data Double-Sided Square Inserts with a Special Chipformer for Heavy Machining Recommended Machining Data

Open the catalog to page 16
FLASH-TURN - 17

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P 45° Lead Angle Lever Lock Longitudinal and Facing Toolholders for Negative Square Inserts Right-hand shown Designation PSSNR/L 2020K-09 PSSNR/L 2525M-09 Spare Parts Designation PSSNR/L 2020K-09 * Optional, should be ordered separately

Open the catalog to page 17
FLASH-TURN - 18

Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications

Open the catalog to page 18
FLASH-TURN - 19

for g d re mnin ee mu ur e gin i l T nc En axmica rma M ono erfo Ec P Double-Sided 55° Rhombic Inserts for Machining Stainless and Low Carbon Steel Recommended Machining Data Designation DNMG 110404-M3M DNMG 110408-M3M DNMG 110412-M3M Double-Sided 55° Rhombic Inserts for General Applications Designation DNMG 110408-GN DNMG 110412-GN Recommended Machining Data Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications Recommended Machining Data

Open the catalog to page 19

All ISCAR Tools catalogs and technical brochures

  1. MILLING

    11 Pages

  2. THREADING

    5 Pages

  3. ITSBORE

    6 Pages

  4. SWISS-CUT

    9 Pages

  5. CUT-GRIP

    7 Pages

  6. TANG-GRIP IQ

    40 Pages

  7. FLASHTURN

    28 Pages

  8. ISCAR INdustry

    24 Pages

  9. catalog 2015

    324 Pages

  10. JET HP Line

    60 Pages

  11. Heat Exchanger

    28 Pages

  12. Milling systems

    593 Pages

  13. TANG-GRIP

    40 Pages

  14. IQ New Products

    184 Pages

  15. GrooveTurn

    372 Pages

Archived catalogs

  1. Combicham

    4 Pages