Catalogs >
ISCAR Tools >
Expansion of the MINI-TANGSLOT Cutter Family

Expansion of the MINI-TANGSLOT Cutter Family
11Pages

Catalog excerpts

Expansion of the MINI-TANGSLOT Cutter Family - 1

MILLING JANUARY 2012 METRIC 2012 Page 1 / 11 Page 1/7 New Product Announcement Expansion of the MINI-TANGSLOT Cutter Family

Open the catalog to page 1

Expansion of the MINI-TANGSLOT Cutter Family - 2

MILLING Page 2 / 11 JANUARY 2012 METRIC 2012 New Product Announcement Highlights • FDN-LN08 cutters with a shell mill and flange configuration, providing a very rigid clamping option. • SDN-FLX Slitting cutters with three adaptation options. ISCAR is expanding the popular MINI-TANGSLOT family of high-efficiency slot milling cutters with the unique, tangentially clamped LNET 08… inserts by adding: 1. Shell Mill Configuration Slitting Cutters The nominal diameters of the new tools are 63, 80 and 100 mm. The 63 and 80 mm diameter cutters feature style A arbor and the 100 mm diameter features...

Open the catalog to page 2

Expansion of the MINI-TANGSLOT Cutter Family - 3

MILLING Page 3 / 11 JANUARY 2012 METRIC 2012 New Product Announcement The indexable slitting cutters carry tangentially clamped inserts. The LNET 08…04 inserts feature 4 cutting edges and a unique chipformer, providing excellent performance and high accuracy, offering the customer a cost-per-edge benefit for slot milling operations. The insert pockets enable mounting different insert widths, which provides the range of 3 to 6.5 mm grooving or slitting widths. The advanced geometry of the LNET 08 … inserts and the progressive design of the tools reduce cutting forces and provide good surface...

Open the catalog to page 3

Expansion of the MINI-TANGSLOT Cutter Family - 4

Full Slot Shell Mill Cutters with LNET 08... Tangentially Mounted Inserts ID Use LNET 0818.. insert with SR 114-018-L2.50 screw (2) Use LNET 0826.. insert with SR 114-018-L3.40 screw (3) Use LNET 0830.. insert with SR 114-018- L4.40 screw («) Use LNET 0835.. insert with SR 114-018-L5.30 screw (5) Use LNET 0828.. insert with SR 114-018-L3.40 screw (6) Use LNET 0832.. insert with SR 114-018-L4.40 screw O Use LNET 0837.. insert with SR 114-018-L5.30 screw Spare Parts

Open the catalog to page 4

Expansion of the MINI-TANGSLOT Cutter Family - 6

Cutter Shank Driving Shanks for SDN-FD<-LN08 Slitting Cutters (1) Reference dimension (2) Reference dimension for D=100 mm. Spare Parts

Open the catalog to page 6

Expansion of the MINI-TANGSLOT Cutter Family - 7

Cutter Flange Shell Type Driving Flanges for SDN-FLX-LN08 Slitting Cutters Spare Parts

Open the catalog to page 7

Expansion of the MINI-TANGSLOT Cutter Family - 8

Cutter Ring Driving Rings for SDN-FLX-LN08 Slitting Cutters

Open the catalog to page 8

Expansion of the MINI-TANGSLOT Cutter Family - 9

MILLING Page 9 / 11 JANUARY 2012 2012 METRIC New Product Announcement Application Instructions Lubrication - Important! For every indexing, lubricate screws before mounting. Grease should cover the screw’s thread and cone head. FDN Indexing L -type key is added to the cutter package. It has a ball shape on the end of its longer side. Feed Direction: Down (climb) milling is recommended ✔ ✗ Do not clamp insert with a broken corner in the outer bottom position. Tightening Torque 60-70 N x cm Tightening Important note: To avoid indexing problems, insert clamping screws and keys should be...

Open the catalog to page 9

Expansion of the MINI-TANGSLOT Cutter Family - 10

MILLING JANUARY 2012 Page 10 / 11 2012 METRIC New Product Announcement Recommended Feed Per Tooth for ETS-LN08, SDN-LN08 and FDN-LN08 Slotting Cutters Using LN.. 08... Inserts P K 45 T (D.O.C.) 40 35 30 25 20 15 10 Non-Alloy Steel 1020 (DIN 1.0402) Mat. Group 1 Alloy Steel 4340 (DIN 1.6582) Mat. Group 8 Alloy Steel 3135 (DIN 1.5710) Mat. Group 9 High Alloy Steel H13 (DIN 1.2344) Mat. Group 10 0.30 0.20 0.22 0.20 0.20 0.30 0.25 0.27 0.25 0.15 0.16 0.16 0.16 0.25 0.20 0.22 0.20 0.13 0.13 0.13 0.12 0.20 0.15 0.17 0.15 0.10 0.10 0.08 0.08 0.15 0.10 0.12 0.10 0.07 0.07 0.04 0.04 0.10 0.05 0.06...

Open the catalog to page 10

Expansion of the MINI-TANGSLOT Cutter Family - 11

MILLING JANUARY 2012 Page 11 / 11 2012 METRIC New Product Announcement Application Instructions Recommended Cutting Conditions Workpiece Materials ISO Class DIN/ISO 513 Description SAE/AISI (DIN) Hardness ISCAR Mat. Group Non-alloy steel 1020 (DIN 1.0402) 130-180 1 IC928 130-200 Alloy steel 4340 (DIN 1.6582) 260-300 8 IC928 120-170 Alloy steel 3135 (DIN 1.5710) HRC 35-40 9 IC928 100-120 High alloy steel H13 (DIN 1.2344) 200-220 10 IC928 100-150 Martensitic s.s. 420 (DIN 1.4021) 200 12 IC928 100-140 Austenitic s.s. 304L (DIN 1.4306) 200 14 IC928 70-120 Austenitic s.s. 316L (DIN 1.4404) 140...

Open the catalog to page 11