Catalogs >
ISCAR Tools >
Expanding the Family with JHP SWISSTURN Toolholders

Expanding the Family with JHP SWISSTURN Toolholders
10Pages

Catalog excerpts

Expanding the Family with JHP SWISSTURN Toolholders

Highlights ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature. The new tools were designed for Swiss-type automatics and CNC machines. They include tools for ISO standard screw-clamped and lever-lock rhombic 80º (C-type), 55º (D-type) and 35º (V-type) inserts, all with 7° positive flank relief inclination.

Open the catalog to page 2

Expanding the Family with JHP SWISSTURN Toolholders - 3

Due to the confined space and tight arrangement of the tools inside Swiss-type machines, the SWISSTURN tools feature small shank sizes with insert cutting edges “in line” with the shank (f=b), to avoid collision. The Swiss-type automatics and CNC machines are widely used in medical, aerospace, automotive, electronics and general metalworking – and for machining complex, precision parts with a length to diameter ratio that is subject to deflection in the turning process. Aerospace

Open the catalog to page 3

Expanding the Family with JHP SWISSTURN Toolholders - 4

The new tools can be used for longitudinal, face and profiling applications on small diameter parts. JHP Tools with Coolant Holes for High Pressure Coolant The use of high pressure coolant is growing as manufacturers are looking for ways to reduce cutting time, improve machining process reliability and achieve longer tool life. ISCAR’s new JHP tools provide all of these advantages. Shorter chips are easily managed and they do not tangle around the workpiece or machine parts, so there is no need to stop the process frequently. Usually, in conventional cooling, the chip prevents the coolant...

Open the catalog to page 4

Expanding the Family with JHP SWISSTURN Toolholders - 5

Features • Very effective cooling down of the cutting edge, which reduces sensitivity to heat fluctuations • Safer and more stable process • Enables higher cutting speeds (increasing productivity) • Effective chip control on problematic materials • Up to 100% increased tool life when machining titanium, heat resistant alloys and alloy steel Vc (m/min) Inconel 718 40 30 20 10 JHP High Pressure Coolant Conventional tool without coolant Inconel 718 - Chip Control with CNMX 120708-M4MW IC807 Vc = 70 m/min Normal Pressure

Open the catalog to page 5

Expanding the Family with JHP SWISSTURN Toolholders - 6

Lever Lock Tools with Channels for High Pressure Coolant for 80° Positive Rhombic Inserts for Swiss Automatic Machines Gr Designation PCLCR/L 1212H-09S-JHP PCLCR/L 1616K-09S-JHP Right-hand shown Spare Parts Designation PCLCR/L-JHP Cooling Unit Lever Lock Tools with Channels for High Pressure Coolant for 55° Positive Rhombic Inserts for Swiss Automatic Machines f 90° Designation PDACR/L 1212H-11S-JHP PDACR/L 1616K-11S-JHP Right-hand shown Spare Parts Designation PDACR/L-JHP Cooling Unit

Open the catalog to page 6

Expanding the Family with JHP SWISSTURN Toolholders - 7

Lever Lock Tools with Channels for High Pressure Coolant for 35° Positive Rhombic Inserts for Swiss Automatic Machines Gr Designation PVACR/L 1212H-11S-JHP PVACR/L 1616K-11S-JHP Right-hand shown Spare Parts Designation Cooling Unit S-CU-JHP S-CU-JHP

Open the catalog to page 7

Expanding the Family with JHP SWISSTURN Toolholders - 8

Screw Lock Toolholders for 55° Diamond Inserts with 7° Clearance Angle for Swiss Type Machines Designation SDHCR/L 1010K-07S SDHCR/L 1212K-07S SDHCR/L 1616K-07S SDHCR/L 1212K-11S SDHCR/L 1616K-11S Right-hand shown Spare Parts Designation SDHCR/L 1010K-07S SDHCR/L 1212K-07S SDHCR/L 1616K-07S SDHCR/L 1212K-11S SDHCR/L 1616K-11S

Open the catalog to page 8

Expanding the Family with JHP SWISSTURN Toolholders - 9

93° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle For Swiss type machines Spare Parts Designation SVJCR/L 0808K-11S SVJCR/L 1010K-11S SVJCR/L 1212K-11S SVJCR/L 1616K-11 Right-hand shown

Open the catalog to page 9

Expanding the Family with JHP SWISSTURN Toolholders - 10

72.5° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle Designation SVVCN 0808K-11S SVVCN 1010K-11S SVVCN 1212K-11S SVVCN 1616K-11S (1) For Swiss type machines Spare Parts Designation SVVCN 0808K-11S SVVCN 1010K-11S SVVCN 1212K-11S SVVCN 1616K-11S 117° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle Designation SVPCR/L 1212K-11S SVPCR/L 1616K-11S Right-hand shown Spare Parts Designation SVPCR/L

Open the catalog to page 10