MULTI-MASTER LINES
112Pages

{{requestButtons}}

Catalog excerpts

MULTI-MASTER LINES - 1

ISCAR MULTI-MASTER LINES SOLID CARBIDE & INDEXABLE HEADS Inch Catalog HOLE MAKING THREAD MILLING

Open the catalog to page 1
MULTI-MASTER LINES - 2

THE STANDARDS INSTITUTION OF ISRAEL Quality Standard ISCAR has been certified by the prestigious Standards Institution, as being in full compliance to ensure delivery of the finest quality goods. Quality control facilities include the metallurgical laboratory, raw metal testing, an online testing procedure and a machining center for tool performance testing and final product inspection. Only the finest products are packaged for entry into ISCAR’s inventory. THE STANDARDS INSTITUTION OF ISRAEL THE STANDARDS INSTITUTION OF ISRAEL THE STANDARDS INSTITUTION OF ISRAEL THE STANDARDS INSTITUTION...

Open the catalog to page 2
MULTI-MASTER LINES - 5

Exchangeable Solid Carbide Heads Type Helix Angle No. of Flutes Diameter Range Remarks Slot Drill Milling Heads High Speed Machining on Aluminum High Speed Machining on Aluminum-CHATTERFREE For Machining Hardened Steel (up to 65 HRC). For Machining Titanium Alloys Finishred CHATTERFREE Rough Machining on Aluminum Rough Milling Ball Nose for Machining Aluminum Face Mill Ball Nose Milling

Open the catalog to page 5
MULTI-MASTER LINES - 6

USER GUIDE Exchangeable Solid Carbide Heads No. of Flutes Diameter Range Remarks Oval-Shaped (Barrel) Lens-Shaped (Barrel) Ball Nose for General Finishing Center Cutting, 240° Spherical Cutting Profile Feed Mill Feed Mill Corner Rounding Chamfering, Countersinking and Spot Drilling for DIN 74 Screw Flat Bottom Drill Heads Double Chamfering Double Chamfering Groove Milling Groove Milling Groove Milling

Open the catalog to page 6
MULTI-MASTER LINES - 7

Exchangeable Solid Carbide Heads Helix Angle No. of Flutes Diameter Range Remarks Involute Spline Blank Heads Blank Heads Modular SUMOCHAM Drill Corner Round Milling

Open the catalog to page 7
MULTI-MASTER LINES - 8

USER GUIDE Indexable Endmills with a MULTI-MASTER Adaptation Helix Angle

Open the catalog to page 8
MULTI-MASTER LINES - 9

Indexable Endmills with a MULTI-MASTER Adaptation Helix Angle Diameter Range USER GUIDE Shanks for MULTI-MASTER Adaptation Connection Thread Size (THSZMS) Connection Diameter Machine Side (DCONMS) Connection Thread Nominal Size Workpiece (THSZWS)

Open the catalog to page 9
MULTI-MASTER LINES - 10

USER GUIDE Shanks for MULTI-MASTER Adaptations Connection Thread Size (THSZMS) Connection Diameter Machine Side (DCONMS) Accessories for MULTI-MASTER Heads MM Adjustable Torque Keys Connection Thread Nominal Size Workpiece (THSZWS) T05-T15

Open the catalog to page 10
MULTI-MASTER LINES - 11

MULTI-MASTER and FLEXFIT Connection Options MILLING HEADS USER GUIDE Features Modular system reduces stock cost by using the same head with different shank options. Enables machining with larger overhang. Same head can be mounted on metric and inch combinations.

Open the catalog to page 11
MULTI-MASTER LINES - 12

USER GUIDE Clamping and Indexing Instructions Do not apply lubricant to the threaded connection. Thread Size Tightening Torque (Lbfxinch) Order separately

Open the catalog to page 12
MULTI-MASTER LINES - 13

MM Adjustable Torque Keys Adjustable Torque Handle and Keys for Secure and Accurate Tightening of MULTI-MASTER Milling Heads Designation TORQUE WRENCH 5-50Nm 9X12 MM WRENCH 6-05 MM WRENCH 8-06 MM WRENCH 10-08 MM WRENCH 13-10 MM WRENCH 16-12 MM WRENCH 20-15 MM WRENCH 4E-05 MM WRENCH 5E-06 MM WRENCH 7E-08 MM WRENCH 8E-10 MM WRENCH 9E-12 INSERT TOOL 3/8" 9X12mm BIT SOCKET T20 3/8" DRIVE BIT SOCKET T25 3/8" DRIVE BIT SOCKET T30 3/8" DRIVE BIT SOCKET T40 3/8" DRIVE BIT SOCKET T50 3/8" DRIVE Torx T20 Torx T25 Torx T30 Torx T40 Torx T50 USER GUIDE • NOTE: Recommended clamping torque for each...

Open the catalog to page 13
MULTI-MASTER LINES - 14

USER GUIDE Table of Contents Grade Priorities for MULTI-MASTER Solid Carbide Heads ISO M 14 Stainless Steel Austenitic & Duplex (FerriticAustenitic) Stainless Steel Ferritic & Martensitic Cast Iron High Temp Alloys Hard Steel & Hardened Cast Iron Harder IC903 MULTI-MASTER Endmills Roughing/ Semi-Finishing IC08 Finishing Tougher Coolant First choice

Open the catalog to page 14
MULTI-MASTER LINES - 15

Machining Data for MULTI-MASTER Exchangeable Solid Carbide Heads (Inch) Material <0.25% C non-alloy ≥0.25% C steel and cast <0.55% C steel, free cutting steel ≥0.55% C low alloy and cast steel (less than 5% of alloying elements) high alloyed steel, cast steel and tool steel stainless steel and cast steel M stainless steel and cast steel gray cast iron (GG) K nodular cast iron (GGG) malleable cast iron aluminum-wrought alloys aluminumcast alloys copper alloys non metallic high temperature alloys titanium alloys hardened steel chilled cast iron cast iron USER GUIDE

Open the catalog to page 15
MULTI-MASTER LINES - 16

SQUARE SHOULDER ENDMILLS

Open the catalog to page 16
MULTI-MASTER LINES - 17

MM FM Interchangeable Solid Carbide Face Milling Heads with MULTIMASTER Threaded Connections Recommended Machining Data Number of flutes * Optional, to be ordered separately SQUARE SHOULDER ENDMILLS Exchangeable Solid Carbide Heads MM ECU Interchangeable 3 Flute Undersized Solid Carbide Heads for Keyways (DIN 6885) Recommended Machining Data • For shanks, see pages 93-101 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 10-11. • Do not apply lubricant to the threaded connection. • For user guide, see pages 9,12-1

Open the catalog to page 17
MULTI-MASTER LINES - 18

Recommended Machining Data • For shanks, see pages 93-101 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 10-11 • Do not apply lubricant to the threaded connection. • For user guide, see pages 9,12-13 (1) Number of flutes SQUARE SHOULDER ENDMILLS 16 MM EC-3 Interchangeable 3 Flute Solid Carbide Endmill Heads with 45° Helix

Open the catalog to page 18
MULTI-MASTER LINES - 19

Recommended Machining Data SQUARE SHOULDER ENDMILLS MM EC-4 Interchangeable 4 Flute Solid Carbide Endmill Heads with 30°, 45° Helix and Various Corner Radii • For shanks, see pages 93-101 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 10-11 • Do not apply lubricant to the threaded

Open the catalog to page 19
MULTI-MASTER LINES - 20

Recommended Machining Data SQUARE SHOULDER ENDMILLS MM EC-6 Interchangeable 6 Flute Solid Carbide Endmill Heads with 30°, 45° Helix and Various Corner Radii • For shanks, see pages 93-101 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 10-11 • Do not apply lubricant to the threaded connection. • For user guide, see pages 9,12-13 (1) Number of flutes (2) Maximum ramping angle MM EC-D Interchangeable 6, 8, 10 Flute Solid Carbide Endmill Heads with 50° Helix for Machining Hardened Steel Recommended Machining Data • For shanks, see pages...

Open the catalog to page 20

All Iscar Metals catalogs and technical brochures

  1. FLASH TOOLING

    18 Pages

  2. FLASH DRILL

    20 Pages

  3. FLASH SOLID

    80 Pages

  4. THREADING LINES

    484 Pages