*mydirectindustry

iMC2S

Product catalog summary

Product Overview
The iMC2S is an industrial-grade media converter and unmanaged switch designed to convert 10/100Base-T(X) to 100Base-FX or 100Base-X SFP interfaces, extending communication distances using optical fiber. It supports MDI/MDIX auto-detection, eliminating the need for crossover cables. The device operates in temperatures ranging from -40°C to +85°C and supports a wide input voltage range, making it suitable for harsh environments. The Link Fault Pass-through (LFP) feature allows for quick detection of link failures, minimizing data loss.

Features
The iMC2S includes one 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X port, and one 100FX SC/ST or 100Base-X SFP port. It supports full/half duplex operation, store and forward transmission, and has dual input power supplies. The device is housed in an IP-40 galvanized steel enclosure and can be mounted on a DIN rail or panel.

Technical Specifications
The device features a 10/100Base-T(X) RJ45 port with auto MDI/MDIX and a 100Base-FX SC/ST or 100Base-X SFP port. It uses store-and-forward processing and includes DIP switches for LFP mode, Ethernet speed, and duplex settings. The enclosure is IP-40 rated, and the device dimensions vary slightly between panel and DIN rail mounts. It consumes 2.2 Watts of power and includes overload and reverse polarity protection.

Compliance and Standards
The iMC2S complies with FCC Part 15, Class A, and various EN standards for electromagnetic emissions and immunity. It meets safety standards EN60950-1 and operates in environments from -40°C to +85°C with 5% to 95% non-condensing humidity. It is also compliant with IEEE 802.3 standards for Ethernet and RFC standards for MDI and UDLD protocols.

Ordering Information
The product can be ordered with various configurations, including different power supply options, mounting types, and Ethernet port configurations. Options include multimode and singlemode SC/ST ports with varying distances and wavelengths, as well as a 100Base-X SFP port. Conformal coating is available as an option.

Catalog excerpts

Data Sheet iMC2S Industrial 2 Ports Ethernet to Fiber Media Converter/ Unmanaged Switch Product Overview iMC2S is an industrial grade cost-effective solution for conversion of 10/100Base-T(X) to 100Base- FX or 100Base-X SFP interface which allows extending of communication distance using optical ﬁber. The media converter supports MDI/MDIX auto detection for 100Base-T(X) interface, so crossover wires are not required. The iMC2S has a wide operating temperature range from -40°C to +85°C, accepts a wide input voltage range, and is suitable for harsh operating environments. iMC2S supports Link Fault Pass-through (LFP) feature, which is used to solve problems encountered when operating traditional media converters. Such problems occur when one side of the link fails, and the other side still continues to transmit packets while waiting for a response that will never arrive. With LFP, system administrators can notice a link failure within a short period of time, minimizing the loss caused by this problem. A DIP-Switch enables the LFP Tel: +1 905-670-0004 Toll Free : +1 844-520-0588 Technical Support: +1 844475-8324 Email: [email protected] www. is5com.com All specifications are subject to change without notice. function, enabling the iMC2S to force a link to shut down immediately when the other link fails, giving the application software a chance to react to the situation.

Open the catalog to page 1

Network Architecture All specifications are subject to change without notice.

Open the catalog to page 2

Features Table 1. Features Feature 1 x 100FX SC/ST port or 1 x 100Base-X SFP port Ethernet to Fiber or Ethernet to SFP port Link Fault Pass-through (LFP) function Full/half duplex operation 1 x 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X port Store and forward transmission Dual Input Power Supplies IP-40 Galvanized Steel Housing DIP-Switch for setting various functions Operating Temperature ‐40°C to +85°C DIN rail and panel mount All specifications are subject to change without notice.

Open the catalog to page 3

All specifications are subject to change without notice. DS-iMC2S-2-EN.docx Page—4

Open the catalog to page 4

All specifications are subject to change without notice. DS-iMC2S-2-EN.docx Page—5

Open the catalog to page 5

Dimensions All dimensions are shown in inches. Panel mount Dinrail mount Option with 100Base-X SFP Ethernet port 2 shown All specifications are subject to change without notice.

Open the catalog to page 6

Example Order Code iMC2S-LV-D-1RJ45-1SMSC15-C1 Description: Industrial Media Converter Slim Line, (Power Supply) Dual Input 10-48VDC, (Mount) DIN Rail Mounting, (Ethernet Port 1) 1 X 10/100Base-T(X) RJ45, (Ethernet Port 2) 1 X 100FX Singlemode SC, 1310nm, 15km, C1 - added for conformal coating All specifications are subject to change without notice. DS-iMC2S-2-EN.docx Page—7

Open the catalog to page 7

iMC2S

iMC2S

Catalog excerpts

All IS5 Communications catalogs and technical brochures