Data Sheet iMC2F Industrial 2 Ports Ethernet to Fiber Media Converter/ Unmanaged Switch IEC 61850-3 and IEEE 1613 Compliant Product Overview iMC2F is an industrial grade cost-effective solution for conversion of 10/100Base-T(X) RJ45 to 100FX or 100Base-X SFP interface which allows extending of communication distance using optical fiber. It is a fully compliant with standards IEC 61850-3 and IEEE 1613 converter that has been designed for power substation and rolling stock applications. The media converter supports MDI/MDIX auto detection for 10/100Base-T(X) interface, so crossover wires are not required. The iMC2F has a wide operating temperature range from -40°C to +85°C, accepts a wide input voltage range, and is suitable for harsh operating environments. iMC2F supports Link Fault Pass-through (LFP) feature, which is usually used to solve problems encountered when operating traditional media converters. Such problems occur when one side of the link fails, and the other side still continues to transmit packets while waiting for a response that will never arrive. With LFP, system administrators can Tel: +1 905-670-0004 Toll Free : +1 844-520-0588 Technical Support: +1 844-475-8324 Email: [email protected] www. is5com.com notice a link failure within a short period of time, minimizing the loss caused by this problem. To enable the LFP function, a DIP switch is used, and the iMC2F forces the link to shut down as soon as it notices that the other link has failed, giving the application software a chance to react to the situation. All specifications are subject to change without notice.

Network Architecture The LFP function works only when both two converters have this capability in pairs. Furthermore, both media converters should be supplied by the same manufacturer/vender. All specifications are subject to change without notice.

Features Table 1. Features • 1 x 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X port • 1 x 100FX SC/ST port or 1 x 100Base-X SFP port • Ethernet to Fiber or Ethernet to SFP port • Link Fault Pass-through (LFP) function • Full/half duplex operation • Store and forward transmission EN50155-compliant Ethernet switch for rolling stock applications Relay output for power failed alarm Dual Input Power Supplies IP-40 Galvanized Steel Housing DIP Switch for setting various functions DIN rail and panel mount All specifications are subject to change without notice. DS-iMC2F-2-EN.docx Page—3

All specifications are subject to change without notice. DS-iMC2F-2-EN.docx Page—4

All specifications are subject to change without notice. DS-iMC2F-2-EN.docx Page—5

All dimensions are shown in inches. All specifications are subject to change without notice.

Example Order Code iMC2F-HV-N-1RJ45-1MMST-C1 Description: Industrial Media Converter-61850-3 Compliant, (Power Supply) Single Input 110-370VDC or 90-264VAC with Single 10-48VDC Backup, (Mount) No Mounting Hardware, (Ethernet Port 1) 1 X 10/100Base-T(X) RJ45, (Ethernet Port 2) 1 X 100FX Multimode ST, 1310nm, 2km (Blank no optical transceivers), C1 - added for conformal coating All specifications are subject to change without notice. DS-iMC2F-2-EN.docx Page—7

All specifications are subject to change without notice. DS-iMC2F-2-EN.docx Page—8