PORTA GANTRY RAPIDE™
36Pages

PORTAGANTRY RAPIDE REIDLIFTING.COM Assembly & Operation Guide

Intended Use Maximum Capacity Inspection Prior to Initial Operation Inspection Before Starting Work Temperature Range Notes for Correct Operation Warning Fall Protection Applications 7 Use as a Fall Protection Anchor Additional Notes for Correct Operation Warning IRATA Inspection & Maintenance 17 Regular Inspections Maintenance & Repair Storage & Transportation ATEX ATEX Classification [Zone 2] Classification [Zone 1] Spark Formation Static Electricity Inspection, Maintenance & Repair Assembly Instructions Dimensions Quality & Safety Regulations, Standards & Directives Accreditations...

Portable. Safe. They apply for: > Operation, including preparation, troubleshooting during operation and cleaning > Maintenance, inspection and repair > Transportation Please read the following instructions and guidance notes carefully, before using or operating the system. They contain important information about how to handle and use the system in a safe and efficient way, avoiding danger, reducing repair costs and downtime, and increasing the reliability and lifespan of the system. It is the responsibility of the end user to adhere to the Health & Safety and accident prevention standards...

Intended Use This product is designed, tested and intended to be used for the lifting of goods, the lifting of personnel or for providing a safety anchor for the prevention of falls as part of a personal fall protection system. (PFAS). The use of our products for these multiple applications is consistent with the products design, notwithstanding pre-user inspections and mandatory inspections by a competent or qualified person, determined by local regulations. Maximum Capacity Lifting of Goods: Each product will be marked with a Working Load Limit (WLL). The WLL is specifically intended as a...

For fall protection applications see page 7. This product has different ratings depending upon the application as detailed in the table below: Inspection Prior to Initial Operation This product must be inspected prior to initial operation by a competent person to ensure that the structure is safe and that it has not been damaged by incorrect assembly, transport or storage. Inspection Before Starting Work Before starting work, the assembly of the product and all load-bearing components should be checked for visual defects. This includes checking the integrity of all profiles for denting,...

> Attach the hoist to the lifting point on the trolley only, making sure it is attached in a way that does not expose the user to danger by the hoist, chain or load. > Only raise and lower loads when castor brakes are engaged. > Do not allow the load to swing. > To avoid side pull, lowering and lifting should only be carried out when the load chain forms a straight and vertical line between the load and lifting attachment point on the trolley. If a vertical lift is not possible you must ensure that the load is within the footprint of the Gantry A-Frames (refer to figure A). > We recommend...

> Fall Protection Applications Use as a Fall Protection Anchor This section must not be read in isolation from all other sections of this manual. Read the whole manual before using this product. Fall arrest: This product is tested and conforms to the requirements of EN795:2012 Personal Fall Protection Equipment - Anchor Devices for single or multiple users and CEN TS 16415:2013 subject to the configuration of the product being used. When being used for fall arrest, the operator must use a body harness and a shock absorber that complies with the relevant national standards and regulations...

> Never walk away from the footprint of the product or move outside designated safe zones whilst connected to it where there is a risk of a fall (refer to figure B). Ensure that the operating area is within the footprint of the system before beginning work. > When using the product as a fall arrest anchor ensure there is adequate fall clearance when working at height (refer to figure C) A competent person should calculate this taking into account all of the components of the personal fall arrest system and allowing a safety margin. > Never adjust the product whilst a person is attached to...

PORTAGANTRY RAPIDE Fall Protection/Confined Space Set Up | 1 User Retrieval SRL installed on upright with bracket Self retracting lifeline for fall arrest scenario *Set up is indicative - Various winch brackets available. Masterlink or Close Coupled trolley options available.

Fall Protection Applications Fall Protection/Confined Space Set Up | 1 User Self retracting lifeline for fall arrest scenario *Set up is indicative - Various winch brackets available. Masterlink or Close Coupled trolley options available. Man riding winch installed on trap plate with bracket

PORTAGANTRY RAPIDE Fall Protection/Confined Space Set Up | 2 Users [PGR1000 Only] Self retracting lifeline for fall arrest scenario Man riding winch installed on trap plate with bracket *Set up is indicative - Various winch brackets available. Masterlink or Close Coupled trolley options available.

Fall Protection Applications Fall Protection Set Up | 2 Users [PGR1000 Only] Self retracting lifeline for fall arrest scenario *Set up is indicative - Various winch brackets available. Masterlink or Close Coupled trolley options available.

PORTAGANTRY RAPIDE PORTAGANTRY RAPIDE 500kg | Fall Protection Anchor Ratings Product Code F = Maximum Rated Force Winch or SRL position on upright. Anchor Point ‘B’ Anchor Point ‘C’ All trollies and sheave carriers are rated for one user.

Fall Protection Applications PORTAGANTRY RAPIDE 500kg | Fall Protection Anchor Ratings Product Code F = Maximum Rated Force Winch or SRL position on trap plate Anchor Point ‘B’ Anchor Point ‘C’ All trollies and sheave carriers are rated for one user.

PORTAGANTRY RAPIDE PORTAGANTRY RAPIDE 1000kg | Fall Protection Anchor Ratings Product Code F = Maximum Rated Force Winch or SRL position on upright. Anchor Point ‘B’ Anchor Point ‘C’ All trollies and sheave carriers are rated for one user.