1. Catalogs
  2. IRIS POWER
  3. RFAII_Flyer_v1

RFAII_Flyer_v1

RFAII_Flyer_v1

RFAII_Flyer_v1

Product catalog summary
Overview
The Iris Power RFAII is a second-generation advanced tool designed for the on-line detection of shorted rotor turns in both round rotor motors and turbo generators, as well as salient pole motors and hydro generators. It is available in two models: Iris Power RFAII-S for salient pole rotors and Iris Power RFAII-R for round rotors. The device is portable, user-friendly, and capable of stand-alone data acquisition.

Specifications
  • Power Source: 115/230 V, 50/60 Hz, <100 W consumption.
  • Communications: USB Port (type B), Ethernet Port (RJ45).
  • Flux Signal Inputs: BNC connectors for single-ended or differential signals, 8-pin for integrated flux and sync sensor signal, signal range 0.3 V to 48 V, impedance 10 kΩ.
  • Synchronization Inputs: BNC connector for sync sensor, impedance > 10 kΩ, range 1-24 V peak, external AC sync via banana jack, range 50 Vac to 237 Vac.
  • Environmental Conditions: Operating temperature 0 ºC to 40 ºC, storage temperature -20 ºC to 50 ºC, relative humidity <90% non-condensing.
  • Case: IP67 protection, lockable latches, drop test up to 2 m, certifications include MIL C-4150J, RoHS, ATA 300, Def Stan 81-41/STANAG 4280.

Features
  • Compatible with Iris Power FluxTracII continuous monitors and accepts Total Flux probes.
  • Includes Iris Power RotorFluxPro software for configuration, downloading, and analysis, compatible with MS Windows XP SP3 or later.
  • High-speed digitizer with > 80 dB SNR, capable of measurements at any load.

Ordering Information
  • M1300: RFAII-R for round rotor machines.
  • M1310: RFAII-S for salient pole machines.
  • M1320: RFAII-RS for both round rotor and salient pole machines.
  • C0010: Modular on-site training seminar.

Performance
  • RFAII-R supports up to 4 rotor poles, while RFAII-S supports 4 to 128 poles.
  • Measurement time is 5 seconds for RFAII-R and 30 seconds for RFAII-S.
  • Internal memory can store 180 measurements for RFAII-R and 300 for RFAII-S.

Contact Information
Iris Power LP, Mississauga, ON, Canada. Phone: 1-905-677-4824. Qualitrol Company LLC, Fairport, NY, USA. Phone: (585) 586-1515.
See more

Catalog excerpts

RFAII_Flyer_v1-1

QUALITROL-IRIS POWER IS THE WORLD’S LARGEST PROVIDER OF MONITORING AND TESTING EQUIPMENT FOR MOTOR AND GENERATOR WINDINGS Iris Power RFAII TM Periodic On-line Rotor Flux Analyzer A second generation advanced tool to find rotor winding shorted turns, during service, in round rotor motors and turbo generators and in salient pole motors and hydro generators The portable Iris Power RFAII analyzer is intended for on-line detection of shorted rotor turns on salient pole rotors (Iris Power RFAII-S) and round rotors (Iris Power RFAII-R). In addition to manual measurements, the Iris Power RFAII analyzer is capable of stand-alone data acquisition once it is configured, i.e. without a connected computer, and the collected measurements are saved in its internal memory. The analyzer is compact, simple to use, and user-friendly, while maintaining high resolutions and powerful algorithms. SPECIFICATIONS POWER SOURCE • Voltage: 115/230 V, 50/60 Hz • Consumption: <100 W COMMUNICATIONS • USB Port (type B connector), Ethernet Port (RJ45 connector) FLUX SIGNAL INPUTS • Connectors: • BNC for both single ended (1) or differential flux signals (2) • 8-pin, polarized, for integrated flux and sync sensor signal (combination probe) • Signal range: 0.3 V to 48 V • Impedance: 10 kΩ OTHER FEATURES • Accepts Total Flux probes (Iris Power TFProbeTM) and other flux sensors. • Compatible with Iris Power FluxTracII TM continuous monitors SYNCHRONIZATION INPUTS • Sync Sensor • Connector: BNC (1) • Impedance: > 10 kΩ • Range: 1- 24 V peak • Combination probe (see Flux inputs) • External ac sync • Connectors: banana jack (2) • Range: 50 Vac to 237 Vac IRIS POWER ON-LINE PRODUCTS

 Open the catalog to page 1
RFAII_Flyer_v1-2

ENVIRONMENTAL CONDITIONS • Relative humidity: <90 % non-condensing FLUX DATA ACQUISITION Number of rotor poles Up to 4 Number of measurements (internal memory) 180 Measurement mode SYNC SENSOR DATA ACQUISITION • Targets per revolution Iris Power RFA/Z-R: 1 • Targets per revolution Iris Power RFA//-S: 3 (0°, 60°, and 180°), for reversible pump-turbines; 1, otherwise • Iris Power RotorFluxPro™ software for configuration, downloading, and analysis (included with instrument) • Runs on any computer with MS Windows XP SP3 or later operating system • Signal simulation utility (included with software)...

 Open the catalog to page 2

All IRIS POWER catalogs and technical brochures

  1. DCR_50

    2  Pages

  2. PDA-IV_Flyer

    4  Pages

  3. EMC

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.