1. Catalogs
  2. IRIS POWER
  3. PDA-IV_Flyer

PDA-IV_Flyer

PDA-IV_Flyer

PDA-IV_Flyer

Product catalog summary
Introduction
The Iris Power PDA-IVTM is a portable instrument designed for periodic on-line partial discharge monitoring of hydro generators. This technique allows utilities to transition from time-based to condition-based maintenance, enhancing the lifespan of generator units by providing detailed insights into insulation conditions.
Specifications and Methodology
The Iris Power PDA-IV enables predictive maintenance on hydro generator stator windings, increasing availability and extending operating life. It uses 80pF capacitive couplers for high-frequency measurements, ensuring a favorable signal-to-noise ratio. The system can distinguish between noise and partial discharge signals, allowing for accurate interpretation of results. The instrument is controlled via a computer with Windows-based software, and continuous monitoring systems can be integrated with plant SCADA for remote monitoring.
Test Procedure
During normal generator operation, the Iris Power PDA-IV is connected to a coupler termination box and a computer. It records the magnitude, phase position, and number of partial discharge pulses, which can be analyzed immediately or stored for later review. The results include graphs, trend curves, and statistical values, which can be compared with historical data. Users can independently assess stator winding insulation conditions after minimal training.
Benefits and Industry Acceptance
On-line partial discharge monitoring helps identify and repair stator problems early, increasing generator availability and extending stator winding life. It reduces the frequency of inspection outages and prevents in-service failures. The method has a low rate of false indications and is applicable to both existing and new generators. The PDA test is widely accepted by major utilities due to its effectiveness, cost-efficiency, and ease of use.
Technical Details
The system uses high-quality mica capacitive couplers, certified to be discharge-free at twice the operating voltage. These couplers are resistant to electrical tracking and are installed in a differential configuration to distinguish between noise and partial discharge signals. The PDA-IV instrument separates these signals for analysis, providing insights into insulation deterioration.
Conclusion
The Iris Power PDA-IV is a proven tool for on-line partial discharge monitoring, offering significant benefits in predictive maintenance for hydro generators. Its widespread industry acceptance underscores its reliability and effectiveness in maintaining generator health and performance.
See more

Catalog excerpts

PDA-IV_Flyer-1

QUALITROL-IRIS POWER, THE WORLD’S LARGEST PROVIDER OF ON-LINE PERIODIC AND CONTINUOUS PARTIAL DISCHARGE MEASUREMENT SYSTEMS Iris Power PDA-IVTM Periodic On-line Partial Discharge Monitoring Using a Portable Instrument for Hydro Generators “By combining on-line monitoring and a diminished schedule of off-line testing, the utility has switched from time-based to a condition-based procedure for allocating resources for testing and maintenance…, the maintenance staff can discern more thoroughly the condition of the insulation and what, if any, repairs or changes in operating procedures need to be done to increase the lifespan of the unit.” IRIS POWER ON-LINE PRODUCTS

 Open the catalog to page 1
PDA-IV_Flyer-2

IRIS POWER PDA-IV PERIODIC ON-LINE PARTIAL DISCHARGE MONITORING OF HYDRO GENERATORS The test enables predictive maintenance on hydro generator stator windings, resulting in the increased availability and extension of operating life. The technique was introduced more than three decades ago and has since been used on over 5000 hydro generators to identify deteriorated stator windings. The method is non-destructive and based on proven scientific and empirical principles and is recommended by manufacturers and industry standards such as the IEEE Std. 1434-2000. The monitoring technique is based on...

 Open the catalog to page 2
PDA-IV_Flyer-3

IRIS POWER PDA-IV IRIS POWER PDA-IV TEST PROCEDURE With the generator operating under normal service conditions, the operator connects the Iris Power PDA-IV instrument to a coupler termination box and to a portable computer running the Iris Power software. The magnitude, phase position and number of partial discharge pulses detected at each coupler are then recorded and can be viewed immediately, or stored for a subsequent analysis. The results presented to the user include: • graphs depicting the nature and severity of particular insulation aging mechanisms • trend curves highlighting the progression...

 Open the catalog to page 3
PDA-IV_Flyer-4

IRIS POWER PDA-IV DETECTION OF PARTIAL DISCHARGES Partial discharges in degrading high voltage stator windings give rise to small voltage pulses which travel through the stator winding. The magnitude and number of these pulses depends on the degree of insulation deterioration. That is, as the magnitude and number of partial discharge voltage pulses increase, the rate of the electrical insulation deterioration must also be increasing. The partial discharge signals are often mixed with electrical noise from sources such as corona and output bus arcing, but are separated for analysis by the Iris...

 Open the catalog to page 4

All IRIS POWER catalogs and technical brochures

  1. DCR_50

    2  Pages

  2. EMC

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.