Leaf chains and multistrand chains
1 / 7Pages

Leaf chains and multistrand chains Leaf chains are designed to handle heavy loads. Compared to precision roller chains, leaf chains have higher strength ratings suitable for high load and high impact environments

Leaf chains and multistrand chains Leaf chains are designed to handle heavy loads. Compared to precision roller chains, leaf chains have higher strength ratings suitable for high load and high impact environments. Widely used for lifting and hoisting purposes, leaf chains are often seen on equipment such as lift trucks, boom trucks, fork lifts, automobile parking towers, inter-modal container lifts and freight elevators. The composition of the leaf chains is simple. Leaf chains are composed of stacks of link plates and pins. The outer links are press-fitted to the pins. Pins are then...

Leaf chains and multistrand chains Leaf chain light Series LL according to European standard ISO 4347 / DIN 8152 Application: For applications where it is important to have a high ratio between breaking load and weight, and low cost. This series is used in cases where the load applied is essentially static, with infrequent articulations on the pulleys and low speeds. Most common combinations: 2x2, 4x4, 6x6. Plate thickness IS? Weigh'per strenght meter min. Tensile strength Stainless steel Clevis Pins CS CARBON STEEL DT DELTA-TONE SS STAINLESS STEEL

Leaf chains and multistrand chains Leaf chain Heavy Series BL according to American standard ISO 4347 / DIN 8152 Application: Applications where higher fatigue and wear resistance are required. Most common combinations: 2x3, 3x4, 4x6. thickness diameter Tensile tensile Weigh'per strength strenght meter min. Tensile strength Stainless steel Clevis Pins

Leaf chains and multistrand chainsLeaf chain Heavy Series BL according to American standard ISO 4347 / DIN 8152 ISO SERIES thickness diameter Tensile tensile Weigh' per strength strenght meter min. Tensile strength Stainless steel Clevis Pins

T +34 943 120 550 iris0iris-chains.com www.iris-chains.com Leaf chains and multistrand chains Leaf chain Series AL Application: Cases where the load can be considered as almost static and joint wear represents no problem. Most common combinations: 2x2, 4x4, 6x6. min. Tensile strength Stainless steel

Leaf chains and multistrand chainsPear drop end links for leaf chains ISO SERIES Connection with clevis 1. When an inner link is used fo the end, a clevis pin is normally supplied by the clevis manufacturer. 2. When an outer link is used for the end, the press fit the outer link provides the most integrity. Clevis pins Press fit and rivet outer link Clevis connector