1. Catalogs
  2. IRD Balancing
  3. Model 941B VIBRATION SENSOR

Model 941B VIBRATION SENSOR

Model 941B VIBRATION SENSOR

Model 941B VIBRATION SENSOR

Product catalog summary
Overview: The IRD Model 941B Vibration Sensor is a solid-state seismic accelerometer designed for permanent installation on machinery. It is built to endure harsh industrial conditions, including high temperatures, fluids, steam, and radiation, and is resistant to coolant splashes on machine tools. Its compact size allows for installation near bearings, and the integral cable design avoids connector issues.
Installation: The sensor features a unique clamp mount for easy installation on a 1.5-inch diameter flat spot using a ¼-28 machine screw. This design allows for easy removal and replacement during maintenance without affecting performance. The sensor's internal low-output impedance amplifier can transmit signals over long distances, making it suitable for large installations with centralized processing equipment. It is protected against electrostatic discharge and radio frequency interference.
Specifications:
  • Frequency Response: 10 Hz to 2kHz ±10% at 70°F (21°C)
  • Sensitivity: 50 mV/g ±10% at 100 Hz
  • Dynamic Range: 0.005 - 100 g peak
  • Transverse Response: 5% average
  • Grounding: Case connects to cable shield, isolated from internal circuitry
  • Power Requirement: +16 to +26 VDC at 9 mA through a 1000 ohm resistor
  • Output Bias: +10 to +20 volts DC
  • Construction: Water-tight, dust-tight, corrosion-resistant stainless steel NEMA 4x case with a high-temperature, shielded, two-wire, Tefzel-jacketed cable
  • Temperature Range: -40 to 300°F (-40 to 149°C)
  • Weight: 9.5 oz (270 g) with 10 ft cable, 15.2 oz (430 g) with 30 ft cable, 20.8 oz (590 g) with 50 ft cable
Ordering Information:
  • Part Number E33339: Model 941B Sensor with 10 ft (3m) integral cable
  • Part Number E33340: Model 941B Sensor with 30 ft (9m) integral cable
  • Part Number E33341: Model 941B Sensor with 50 ft (15m) integral cable
  • Part Number E32585: Mounting Clamp Kit
Contact Information: For inquiries, contact IRD LLC at their USA headquarters or their offices in the UK, Mexico, and Canada. Email: [email protected]
See more

Catalog excerpts

Model 941B VIBRATION SENSOR-1

www.irdbalancing.com Model 941B VIBRATION SENSOR The IRD Model 941B Vibration Sensor is a solid state seismic accelerometer for permanent mounting on machinery. It is designed to withstand harsh industrial environments, including high temperatures, splashing fluids, steam and radiation, and is resistant to the constant splashing of coolant on machine tools. The wide frequency and amplitude ranges of the 941B accommodate most types of rotating machines. The small size of the 941B permits installation near bear-ings and the integral cable eliminates problems often experienced with connectors. A unique clamp mount simplifies installation on a 1.5 inch (38mm) diameter flat spot, using a ¼- 28 machine screw. The clamp mount facilitates re-moval and replacement of the sensor during maintenance operations with-out affecting the performance of the sensor. The 941B has an internal, low-output impedance amplifier capable of transmitting the vibration signal ac-curately over cable up to several thousand feet long, making it ideal for large installations with centralized signal processing equipment. The am-plifier is protected from electrostatic discharge and radio frequency interfer-ence for reliable, trouble-free operation. A DC bias voltage on the output wire permits remote testing of cable continuity and proper operation. Line Drawings: 941B 44.51.75 "22.3.88 "n4.1 TWO CONDUCTOR CABLE WITH SHIELDn.16 "E33341: 15.2 m50 FTE33339: 3 m10 FTE33340: 9.1 m30 FTGROOVE FOR E32585MOUNTING CLAMP KITFLAT SURFACE, NO MOUNTING HOLEn31.8n1.25 "

 Open the catalog to page 1
Model 941B VIBRATION SENSOR-2

www.irdbalancing.com USA Headquarters: Telephone: (1) 502 366 0916 Fax: (1) 502 238 1001 IRD LLC 4740 Allmond Ave. Louisville, KY 40209, USA UK: Telephone: +44 1244 538170 Fax: +44 1244 528900 IRD UK Ltd. International House, Aviation Park, Flint Road, Saltney Ferry, Chester UK CH4 0GZ MEXICO: Telephone: +52.55.5689.8325 Fax: +52 55.5689.8160 IRD Balancing México S. de R. L. de C.V.; Miguel G. Kramer #29, Col. Atlántida Del. Coyoacán, México, D. F.C.P. 04370 CANADA: Telephone: 1.450.724.4066 Fax: 1.450.724.4077 IRD Canada Ltd. 755 Jean-Baptiste-Varin, La Prairie, QC J5R 6P3, Canada Email: [email protected]...

 Open the catalog to page 2

All IRD Balancing catalogs and technical brochures

  1. B140-200K

    12  Pages

  2. B140-110K

    12  Pages

  3. B750RR

    11  Pages

  4. B50-B200

    2  Pages

  5. B5-B20

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.