Institut für Prüftechnik Competence creates Confidence. Since 1969. Shore hardness tester Description Hardness according to the Shore scale indicates the resistance of different kinds of materials to penetration at a defined spring Software is available as an option: Measurement data acquisition force. The hardness scale ranges from 0 to 100, where 0 Shore Display of the current hardness value and all hardness represents the smallest degree of hardness (2.5 mm penetration values from a test series depth) and 100 Shore the largest (0 mm penetration depth). Graphical display of the test series as a diagram or Shore A is specified for soft elastomers following measurement with a needle (blunt cone with an opening angle of 35°) at Freely definable test report 12.5 N, whereas Shore D is for rubber elastomers following Saving of test series on hard drive/other media measurement with a needle (conical tip with a 30° angle) at 50 Further processing of test series in other programs N. The test unit consists of a basic tester and a test stand with mounting arm. The stand allows the hardness tester to be fixed in place quickly and easily. The tester has precise instruments and high reading accuracy. Simple and safe operation Quick and simple fixation of the hardness tester in the test stand using mounting fixture Reliable test results Accuracy checked using reference plates Lasting efficiency High-quality unit components guarantee high reliability, a long service life and low maintenance costs State-of-the-art technology 300 measurements saved on integrated measurement memory © 2016 IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG – Photos: IPT – Version: 08/16 – Data subject to change. All rights reserved. IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG, Schulstr. 3, 86447 Todtenweis, Germany – [email protected]

Institut fur Pruftechnik Competence creates Confidence. Since 1969. Version Model no. H3020 Shore hardness tester Hardness scale Pressure plate diameter 35° blunt cone penetrating body 30° cone penetrating body Spring force Pressure force Permissible ambient temperature Permissible relative humidity Width (without test stand) Depth (without test stand) Height (without test stand) • included O available/optional □ eligible - not available © 2016 IPT Institut fur Pruftechnik Geratebau GmbH & Co. KG - Photos: IPT - Version: 08/16 - Data subject to change. All rights reserved. IPT Institut fur Pruftechnik...