All-Fiber Femtosecond Pulsed Lasers Pulse Energy as a Function of Rep Rate Output Power up to 50 W 250 - 500 femtoseconds FEATURES  Wavelength 1030 nm  Output Power up to 50 W  Pulse Duration 250-500 fs  Pulse Energy up to 50 μJ  Repetition Rate up to 5.5 MHz  Burst Mode Option  Low-maintenance APPLICATIONS  Ophthalmology  LED Dicing  Life Sciences  Solar Cell Structuring  Precision Micromachining  Photomask Cutting and Repair  Medical Device Manufacturing  Specialty Marking  Microdrilling  Fine Tube Cutting  Thin Film Ablation YLPF femtosecond fiber lasers provide pulses with up to 50 μJ pulse energy with scalable average output power up to 50 W and customer selected pulse durations in the range of 250-500 fs at full operational repetition rate range of 50-5500 kHz. The all fiber format allows for the adjustment of peak power and/or pulse repetition rate without affecting any of the output beam parameters. IPG novel fiber lasers are much more efficient and compact than conventional lasers now on the market and are ideal for applications in precision micromachining. The excellent beam quality, ultrashort pulse duration and high pulse energy combine to provide peak power densities for micromachining virtually any metal, glass, ceramic, silicon or plastic. Models can be designed within specified maximum power 50 W, maximum pulse energy 50 μJ and pulse durations in 250-500 fs range. Burst mode option, shorter pulsed durations and higher pulse

Supply Voltage, VAC Single-phase 50-60 Hz 100-240 +1 (508) 373-1100; IPGPhotonics.com/contact www.ipgphotonics.com DANGER - INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION CLASS 4 LASER PRODUCT IEC 60825-1:2014 Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind IPG only if it is specifically incorporated into the terms and conditions of a sales agreement. Some specific combinations of options may not be available. The user assumes all risks and liability...