PLD-40 Series: 915-975 nm, 30 W Multi-mode Fiber-coupled Diode Lasers Features Amplifier Pumping Direct Diode Lasers Laser Pumping Material Processing Graphic Arts / Printing Medical & Dental Wavelength Stabilization Option at 975 nm IPG Photonics’ PLD-40 Series fiber-coupled diode lasers provide up to 30 W of output power within 0.13 NA. PLD-40 diode options include 105 μm or 110 μm fiber core diameter, and center wavelength at 915 nm, 940 nm or 975 nm. A wavelength stabilization option is also available at 975 nm. IPG’s best-in-class diode technology offers an ideal combination of power, reliability and form factor. We manufacture to rigorous telecom-grade standards in the world’s largest high power diode fab. Each wafer is individually qualified, which sets IPG apart from alternative industrial pump products using short-lived diode bars and bar-stack technologies. PLD-40 diode lasers are preferred for fiber amplifier and laser pumping, material processing, and direct diode applications. 0.12 NA into 105 or 110 μm Fiber Core Diameter High Reliability Robust Compact P

PLD-40 Series: 915-975 nm, 30 W Multi-mode Fiber-coupled Diode Lasers Optical and Electrical Characteristics* Center Wavelength, nm Center Wavelength Tolerance, nm Spectral Width (FWHM), nm Conversion Efficiency, % Recommended Case Temperature, ⁰C Wavelength Shift with Temperature, nm/⁰C Wavelength Shift with Operating Current, nm/A * Typical performance data measured at 12A, 25⁰C. Fiber Characteristics Fiber Core Diameter, μm Fiber Cladding Diameter, μm Fiber Buffer Diameter, μm Beam Numerical Aperture (90% power) Minimum Fiber Bend Radius, mm Maximum Ratings Operating Current (IOP), A Case...