In-line Scanning Weld Monitor Transverse Profile Measures the finished weld bead transverse profile. Finished Weld Surface Measured just behind the melt pool captures the height of the finished weld bead. Keyhole Depth Measured inside the keyhole during the weld to determine actual weld penetration depth in real time. Seam Profile A sweep ahead of the process looks for joint position on the workpiece. Workpiece Height Measures the distance between the material surface and the welding optics. Keyhole Depth + Finished Weld Surface Seam Profile Transverse Profile IPG Photonics introduces the in-line weld monitor for remote scan welding applications. Paired with our IPG OmniWELD Scanning software the LDD-700 offers five monitoring modes: keyhole depth, seam profile, workpiece height, finished weld surface height and bead profile—all from a single instrument. Active steering of the ICI beam allows OmniWELD to seek out defects immediately before, during, and after the welding process. These capabilities are available in a single presentation of the part with little to no additional cycle time or fixturing required. The optimal combination of measurement types, locations, and PASS/FAIL criteria for each weld process can be easily configured in software, simplifying replication on multiple systems.

In-line Scanning Weld Monitor Optical Characteristics Imaging Wavelength, nm Axial Field of View, mm Transverse Field of View, mm General Characteristics Control Unit Dimensions, (W × D × H), mm Head Interface Dimensions (W × D × H), mm Optics Module Dimensions (W × D × H), mm Head Interface Compatibility FLW-D30, D50, D30 Wobble, D50 Wobble, 2D High-Power Scanner and Mid-Power Scanner Real Time Control Outputs -10 to 10 V analogue, TCP/IP, Fieldbus Communication Protocols Devicenet, TCP/IP, Ethernet/IP, Hardwire IO 176 Railway Street, Kingston, Ontario, K7K 2L9 Canada +1 (613) 887-2331; [email protected]...