Specifications:
The document outlines the specifications for the iPLD-9-9XX laser product by IPG Photonics. The nominal continuous wave (CW) output power ranges from 8W to 9W, with a mean wavelength available in the 915 nm to 980 nm range. The spectral width is 4 nm, and the slope efficiency at the operating point is between 0.68 W/A and 0.78 W/A. The in-fiber electro-optical efficiency is 45% to 47%, with a threshold current of 0.33 A. The nominal operating current is less than 11 A, and the forward voltage is less than 1.9 V. The series resistance is under 0.07 W, and the recommended case temperature ranges from 10°C to 50°C. The wavelength shift with output power is less than 2.1 nm/W, and with temperature, it is 0.35 nm/°C. The product has a lifetime exceeding 50,000 hours.

Fiber Characteristics:
The fiber core diameter is 110 µm, with a cladding diameter of 125 µm and a buffer diameter of 250 µm. The numerical aperture is less than 0.15, and the fiber length is up to 1.2 m.

Maximum Ratings:
The maximum operating current is 12A, reverse voltage is 2.5V, and case temperature ranges from 5°C to 70°C. The storage temperature is between -30°C and 80°C, with a lead soldering temperature of 300°C for a maximum of 15 seconds. The relative humidity should be less than 85% in non-condensing conditions, and the fiber bend radius is 30 mm.

Compliance and Safety:
The product complies with FDA performance standards for laser products, with deviations pursuant to Laser Notice No. 50, dated June 24, 2007. It is classified as a Class 4 laser product per EN IEC 60825-1:2007-03, with a maximum average output power of 10 W and a wavelength range of 900 - 1000 nm. Users are advised to avoid eye or skin exposure to direct or scattered radiation.