Pulsed Green Nanosecond Fiber Laser FEATURES  Wavelength 532 nm  Output Power up to 30 W  Peak Power >20 kW  Beam Quality, M2 <1.2  3-pulse Burst Mode  Very Small Heat Affected Zone  Air-cooled  Compact and Low Cost APPLICATIONS  Materials Processing  Micromachining  Solar/Photovoltaic  Scribing  Plastics Marking  Texturing  Si Ablation GLPN-M Series of green nanosecond fiber lasers provide high peak power with scalable average output power up to 30 W and ~1.5 ns pulse duration at full operational repetition rate range of 10-900 kHz. This laser features 3-pulse burst mode allowing users to optimize performance in micromachining applications. The all-fiber format allows for the adjustment of pulse energy and/or pulse repetition rate without affecting any of the output beam parameters. These lasers are offered as compact, rugged and cost-effective OEM modules. End user friendly 19" rack mountable units can also be offered upon request. The short wavelength, short pulse duration and high peak power result in a very small heat affected zone, making these lasers deal for applications in the solar/ photovoltaic arena, resistor trimming and markin

Pulsed Green Nanosecond Fiber Laser Optical Characteristics Wavelength, nm Mode of Operation Average Power, W Peak Power, kW Beam Quality, M Power Tunability, % General Characteristics Control Unit Dimensions (W × D × H), mm Optical Head Dimensions (W × D × H), mm Control Unit Cooling Optical Head Cooling MAX. AVERAGE OUTPUT POWER: 60 W MAX. PEAK OUTPUT POWER: 40 kW PULSE DURATION: 1 ns PULSE REPETITION RATE: 10-900 kHz WAVELENGTH RANGE: 500-530 nm www.ipgphotonics.com Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained...