*mydirectindustry

Catalogs
IPG Photonics Corporation
EAU Series Amplifier Modules

EAU Series Amplifier Modules

Product catalog summary

Overview: The document provides technical specifications and features of the IPG Photonics EAU Series low-noise erbium doped fiber amplifiers (EDFAs), designed for FTTH and CATV equipment manufacturers requiring C-band or L-band optical amplification.

Key Features:

Total output power up to 5 W.
Integrated splitter option with up to 18 ports.
Low noise figure and carrier-to-noise ratio (CNR) maintained better than 1 dB.
Cooler-free pump operation and hardened option for outdoor applications.
Rack mount packaging available with digital control interface.

Applications: The EAU Series is suitable for various applications including CATV, FTTB, FTTC, FTTH, FTTx, broadband access, free space communications, RF video overlay, and other OEM applications.

Technical Specifications:

Output power per port ranges from 17 to 30 dBm depending on the model.
Number of ports varies from 1 to 16.
Output power uniformity is ±0.2 dB.
Operating wavelength range is 1536-1565 nm.
Noise figure is less than 4.5 dB with 0 dBm input and less than 5.5 dB with +5 dBm input.
Composite second order (CSO) is -75 dBC and composite triple beat (CTB) is -80 dBC.
Input/output isolation is 40 dB, and residual pump power is -20 dBm/nm.
Ambient operational temperature range is -10 to +70°C, and storage temperature range is -40 to +85°C.

Legal Notices: The document states that all product information is believed to be accurate but is subject to change without notice. It also mentions that some specific combinations of options may not be available and that the user assumes all risks and liability in connection with the use of the product.

Catalog excerpts

Low Noise Erbium Amplifier Modules ► Free Space Communications ► Total Output Power up to ► Hardened Option for ► Integrated Splitter Option ► Rack Mount Up-packaging ► Cooler-free Pump Operation ► Digital Control Interface IPG Photonics' EAU Series of low-noise, high performance erbium doped fiber amplifiers (EDFAs) are the ideal building blocks for FTTH and CATV equipment manufacturers requiring C-band or L-band optical amplification. EAU Series modules offer the widest range of power choices and are offered in pre-amp, line and booster configurations to enable the most cost-effective network architecture. EAU Series modules are optimized for low noise performance and allow for clear transmission of voice, video and data signals. Carrier-to-noise ratio (CNR) is maintained to better than 1 dB. Output powers with up to 5 watts and up to 18 output ports are available.

Open the catalog to page 1

Low Noise Erbium Amplifier Modules -50-C Output Power per Port, dBm Output Power Uniformity, dB Operating Wavelength Range, nm Noise Figure with 0 dBm Input, dB Noise Figure with +5 dBm Input, dB Composite Second Order (CSO), dBC Composite Triple Beat (CTB), dBC Residual Pump Power, dBm/ nm Ambient Operational Temperature Range, °C Storage Temperature Range, °C www.ipgphotonics.com/telecom Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind IPG only if it is specifically incorporated into the...

Open the catalog to page 2

All IPG Photonics Corporation catalogs and technical brochures

YLS-SM-AMB
2 Pages
YLR-U2
2 Pages
YLS-U SERIES
2 Pages
YLS-U-ECO SERIES
2 Pages
YLS-ECO SERIES
2 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list