*mydirectindustry

MZA70176

Product catalog summary

Product Overview: The MZA70176 is a magnetic sensor designed for pneumatic cylinders, featuring a 6.2mm T-groove and dimensions of 4.3x19x6.2mm. It operates on a 10-30V DC power supply and includes a PNP normally open contact with a cable connector M8 3-pin 0.3m PUR. The sensor is IP67 rated, made from zinc die-cast, and includes an LED indicator.

Mechanical Features: The sensor operates within an ambient temperature range of -25°C to 70°C and has a cable length of 0.3m. It is designed in a cuboid shape with a zinc die-cast housing and can withstand strong vibrations. The sensor is mounted from the top of the cylinder groove and has a maximum tightening torque of 0.1 Nm.

Electrical Features: The sensor has a magnetic sensitivity of 2.8 mT, a no-load current of 15 mA, and a rated switching current of 150 mA. It includes reverse polarity and short-circuit protection, operates at a switching frequency of 1000 Hz, and has a voltage drop of 2 V. The sensor is equipped with an LED display but lacks cross/short circuit identification and safety function suitability.

Other Features: The sensor is suitable for harsh environmental conditions and is compatible with oil and cooling lubricants. It is designed for use with T-groove cylinders and has a packaging dimension of 100mm x 17.0mm x 120mm with a shipping weight of 0.01kg.

Installation and Safety: Installation should be performed by a qualified electrician. The product should not be used in applications where safety depends on its functionality. LED systems may emit UV radiation, and improper use can cause eye damage. The manufacturer disclaims responsibility for damages from improper use or connection.

Catalog excerpts

Data sheet MZA70176 • Subject to alteration! Version: 03.12.2020 MZA70176 MAGNETIC SENSORS • SENSORS FOR PNEUMATIC CYLINDERS sensor magnetic, cylinder, 6.2mm T-groove, 4,3x19x6,2mm, 10-30V DC, 1x PNP NO, Cable connector M8 3pin 0.3m PUR (Polyurethane), IP67, Zinc die-cast, LED, 2.8mT, mounting From the top, Sensor surface position Center of the device MECHANICAL FEATURES Ambient temperature Cable length Housing material Zinc die-cast Increased ambient temperatures > 80°C Material of cable sheath Metal housing Mounting access, cylinder groove Sensor height Sensor length Sensor surface position Sensor width Strong vibration / motion ELECTRICAL FEATURES Cross/short circuit identification possible Magnetic sensitivity No-load current Number of switching outputs Operating voltage Rated switching current Reed contact Relative repeat accuracy Reverse polarity protection Sensor surface (active) Middle area ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │

Open the catalog to page 1

Data sheet MZA70176 • Subject to alteration! Version: 03.12.2020 ELECTRICAL FEATURES Short-circuit protection Suitable for safety functions Switching frequency Type of electrical connection Type of switching function Normally open contact Type of switching output Voltage drop Voltage type With monitoring function of downstream devices OTHER FEATURES Cylinder sensors Cylinder version With T-groove Harsh environmental conditions Metallic sensor surface Short travel path Other Packaging dimensions Shipping weight Tariff code Classification ipf product group ipf electronic gmbh • Rosmarter Allee...

Open the catalog to page 2

Data sheet MZA70176 • Subject to alteration! Version: 03.12.2020 Dimensional drawing Disposal Mounting / installation may only be carried out by a qualified electrician! Safety warnings Before initial operation, please make sure to follow all safety instructions that may be provided in the product information. Never use these devices in applications where the safety of a person depends on their functionality. LED lighting systems can generate intensive UV radiation, which can damage your eyes in case of improper use. The manufacturer cannot be held responsible for damages that result from improper...

Open the catalog to page 3