*mydirectindustry

IB180150

Product catalog summary

Product Overview: The IB180150 is an inductive sensor designed for increased ambient temperatures, featuring a cylindrical, screw-thread design with a stainless steel housing. It operates within a temperature range of 0°C to 180°C and is suitable for flush mounting.

Mechanical Features: The sensor has a Vectra® active area material, an axial cable entry, and a 2-meter silicone cable. It is protected to IP65 standards and has a thread size of M18x1 with a length of 70 mm.

Electrical Features: The sensor operates on a supply voltage of 10-35V DC, with a PNP normally open contact switching output. It has a switching distance of 5 mm and a frequency of 400 Hz. The sensor includes reverse polarity and short-circuit protection.

Performance Parameters: Correction factors vary by material, with a hysteresis of 15% and a relative repeat accuracy of 3%. The rated switching current is 150 mA, and the no-load current is 15 mA.

Safety and Installation: Installation should be performed by a qualified electrician. The sensor is not suitable for safety-critical applications. Users should adhere to safety instructions to prevent damage from UV radiation emitted by LED systems.

Additional Information: The product is classified under various eClass and ETIM standards and has specific packaging dimensions and a shipping weight of 0.14 kg.

Catalog excerpts

Data sheet IB180150 • Subject to alteration! Version: 03.12.2020 IB180150 INDUCTIVE SENSORS • INCREASED AMBIENT TEMPERATURE sensor inductive, M18x1 70long, Flush, Sn: 5, 10-35V DC, 180°C, PNP NO, Cable 2m Silicone, IP65, Stainless steel 1.4305 MECHANICAL FEATURES Active area material of sensor Alignment of cable entry Ambient temperature Cable infeed Cable length Cylinder, screw-thread Housing material Increased ambient temperatures > 80°C Material of cable sheath Mechanical mounting condition for sensor Sensor length Thread length Thread pitch Thread size, metric Wire cross section ELECTRICAL FEATURES Cascadable Correction factor (aluminum) Correction factor (brass) Correction factor (copper) Correction factor (stainl. steel) No-load current Norm measuring plate Rated switching current Readiness delay Relative repeat accuracy Residual ripple ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19

Open the catalog to page 1

Data sheet IB180150 • Subject to alteration! Version: 03.12.2020 ELECTRICAL FEATURES Reverse polarity protection Short-circuit protection Suitable for safety functions Supply voltage Switching distance Switching frequency Type of electrical connection Type of switching function Normally open contact Type of switching output Voltage drop Voltage type With monitoring function of downstream devices Other Packaging dimensions Shipping weight Tariff code Classification ipf product group ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ [email protected]...

Open the catalog to page 2

Data sheet IB180150 • Subject to alteration! Version: 03.12.2020 Dimensional drawing Disposal Mounting / installation may only be carried out by a qualified electrician! Safety warnings Before initial operation, please make sure to follow all safety instructions that may be provided in the product information. Never use these devices in applications where the safety of a person depends on their functionality. LED lighting systems can generate intensive UV radiation, which can damage your eyes in case of improper use. The manufacturer cannot be held responsible for damages that result from improper...

Open the catalog to page 3