CENTRIFUGAL FAN CFH2080804
2Pages

{{requestButtons}}

Catalog excerpts

CENTRIFUGAL FAN CFH2080804 - 1

CENTRIFUGAL FAN AC shaded pole motor right side with impeller Ø76x86mm - CW Rated voltage Rated frequency Rated current Rated power Speed ① Max air flow Max static pressure Noise ② ① Starting voltage Operating temperature Hot gas temperature Operating humidity Impeller rotation IP rate Type of service 100 V from -20°C to +70°C +150°C max 10 – 90 % R.H. (no condensation) CW (look at the impeller) IP 00 S1, S8 (continuous) At max air flow condition. Sound pressure level at 1m and max air flow condition Electrical and mechanical characteristics Insulation Class Class H Appliance Class Class 0I Dielectric strength test 1800V 50Hz for 1 s Motor protection TP 145°C Mounting position Any Housing Impeller Motor bearings Motor damper Electrical wires Material list Galvanized steel sheet Galvanized steel sheet Shielded ball bearings - Electrical connection and wiring diagram Electrical connections: Feeding: male spade terminals 6,3x0,8mm Grounding: male spade terminal 6,3x0,8mm on the motor Standard applied Low Voltage Directive: EN 60335-1 EMC Directive: Emission – EN 55014-1, EN 61000-3-2 and 61000-3-3 Immunity – EN 55014-2 Mounting positions The motor can operate at any positions. Please pay attention: the temperature around the motor must not rise over the max admissible operating temperature, also when the motor is not powered. This revision replaces all previous versions of this document. IPC has done every effort to ensure that all information in this document is complete and correct at the time of publication. Due to possible product improvements, we reserve the right to change certain data in this document without prior notice.

Open the catalog to page 1
CENTRIFUGAL FAN CFH2080804 - 2

AC shaded pole motor right side with impeller Ø76x86mm - CW Performances curves This revision replaces all previous versions of this document. IPC has done every effort to ensure that all information in this document is complete and correct at the time of publication. Due to possible product improvements, we reserve the right to change certain data in this document without prior notice. Rev. 2 - 2022.01.26

Open the catalog to page 2

All IPC catalogs and technical brochures