CENTRIFUGAL FAN CBX4190411
2Pages

BACKWARD CURVED BLDC motor with impeller Ø190x45 mm - CW Rated voltage Rated current Rated power Speed ① Air flow ② Static pressure ② Noise ③ Note: Operating voltage range Operating temperature Storage temperature Operating humidity Impeller rotation IP rate Type of service Config. ref. 16 Vd.c. – 32 Vd.c. from -25°C to +60°C from -40°C to +70°C 10 – 90 % R.H. (no condensation) CW (look at the motor) IP 20 S1, S8 (continuous) FLH190/045E-2201C-1-H31-1 At max air flow condition. Max value. ③ Sound pressure level at 1m and max air flow condition ② Electrical and mechanical characteristics Insulation Class Class B Appliance Class Class III Dielectric strength 500Va.c. for 60s Motor driving mode Sine wave Motor protection - reverse polarity By electronic - locked rotor - over temperature Mounting position Any Material list Housing Impeller Bearing Weight Electrical connector NMB ball bearings 0.80 kg Molex Mini-Fit® Jr. Single row Electrical connection and wiring diagram Electrical connections: Plug slots 1 2 3 4 Plug: Molex Mini-Fit® Jr. single row, code 39-01-4047 Terminals: Molex Mini-Fit® Jr. male terminals tinned, code 39-00-0048 Wire colour Red Blue Yellow White Function Feeding Ground/COM Speed regulation Speed checking This revision replaces all previous versions of this document. IPC has done every effort to ensure that all information in this document is complete and correct at the time of publication. Due to possible product improvements, we reserve the right to change certain data in this document without prior no

BACKWARD CURVED BLDC motor with impeller Ø190x45 mm - CW Examples of possible connections for speed setting and checking Standard applied EMC Directive: Mounting positions The motor can operate at any positions. Please pay attention: the temperature around the motor must not rise over the max admissible operating temperature, also when the motor is not powered. Performance curves This revision replaces all previous versions of this document. IPC has done every effort to ensure that all information in this document is complete and correct at the time of publication. Due to possible product...