Q-Report

Q-Report

Q-Report

Product catalog summary
Introduction
The document discusses the importance of quality evaluation of codes, particularly data matrix codes, to ensure traceability and detect incorrect codes early. The DMR210 and DMR220 systems from IOSS facilitate this evaluation.

Specifications
The systems classify data matrix codes according to common quality standards. The Q-Report software complements these systems by receiving code content, quality data, and images for quality control.

Procedures
The Q-Report software controls the system within a standardized brightness range and evaluates quality according to ISO/IEC 29158. It measures variables like cell contrast and errors in various zones. The software also supports rated reading of dot matrix codes and includes a GS1 format test.

Features and Benefits
  • Generates a quality protocol in PDF format for documentation or customer verification.
  • Evaluates quality according to ISO/IEC 29158 and supports dot matrix codes.
  • Includes a GS1 test for format verification.


Key Parameters
  • Cell Contrast (CC): Measures brightness difference between bright and dark dots.
  • Minimum Reflectance (MR): Brightness difference in calibration template.
  • Cell Modulation (CM): Grey value uniformity in modules.
  • Finder Damage (FD): Damage in Finder and Alternating Grid.
  • Distributed Damage (DD): Assessment of Fixed Pattern zones.
  • Axial Nonuniformity (AN): Distortion along main axes.
  • Global Nonuniformity (GN): Deformity of the grid.
  • Unused Error Correction (UE): Measure of bit errors corrected.


Contact Information
For further information, contact Intelligente optische Sensoren & Systeme GmbH at [email protected] or visit www.ioss.de.

Conclusion
The Q-Report software is a valuable tool for quality control, providing detailed evaluations and documentation for data matrix codes.
See more

Catalog excerpts

Q-Report-1

Q-Report Quality protocol for codes Verification of quality readability In addition to the identification of codes, the quality connected system in the standardised range of evaluation of codes is becoming increasingly brightness. The quality evaluation according to important. Incorrect codes can thus be detected at ISO/IEC 29158 with all criteria only starts and an early stage and complete traceability of products compares them with the specifications defined by the customer once this so-called ML value is reading systems from IOSS enable reproducible reached. This involves various measurable variables quality evaluation. Directly marked data matrix such as cell contrast or errors in the rest zone and codes are detected and at the same time reliably peripheral zone. The Q-Report can of course also be classified according to common quality standards. used for the "rated reading" of dot matrix codes. In The PC-based "Q-Report" software is a useful supplement to an IOSS data matrix reading and addition, the software includes a GS1 test. However, only the format is checked. rating system for quality control in the laboratory or With the "Q-Report" you can easily and quickly offline in the manufacturing process. The Q-Report generate a quality protocol (PDF document) of your software receives the code content and the quality code, which you can save for documentation or as data and the actually captured image from the verification of the delivered quality and readability of system. The "Q-Report" automatically controls the the code or send to the customer. Further information online at:

 Open the catalog to page 1
Q-Report-2

Q-ReportSample report (example) Quality Report IOSS GmbH, 78315 Radolfzell, Fritz Reichle Ring 18 / Tel: + 49 7732 9827960 Page 1 of 2 IOSS GmbH, 78315 Radolfzell, Fritz Reichle Ring 18 / Tel: + 49 7732 9827960 Page 2 of 2 • Quality protocol for codes • Verification of delivered quality and readability of the code as a PDF document • Quality evaluation according to ISO/IEC 29158 as well as for dot matrixcodes according to the "rated reading" Subject to change without prior notice. If you require additional information, please contact us. Intelligente optische Sensoren & Systeme GmbH

 Open the catalog to page 2

All IOSS GmbH Intelligente optische Sensoren & Systeme catalogs and technical brochures

  1. OCR110

    2  Pages

  2. HS-360X

    2  Pages

  3. TR100

    2  Pages

  4. DMT100

    2  Pages

  5. DMG110

    2  Pages

  6. DMG100

    2  Pages

  7. BCA110

    2  Pages

  8. DMR220

    2  Pages

  9. DMR210

    2  Pages

  10. Verification

    2  Pages

  11. BCA110

    2  Pages

  12. DMR410/420

    2  Pages

  13. Q-Tracker

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.