*mydirectindustry

Titan 2

Product catalog summary

Overview: The TITAN 2 is a cutting-edge gas sensing device designed for the detection of benzene, offering high sensitivity and accuracy. It is suitable for industrial environments where benzene exposure is a concern, such as oil and gas, chemical manufacturing, and bulk storage facilities.

Key Features:

Advanced Detection: Capable of detecting benzene concentrations from 0.02 ppm to 20 ppm within 60 seconds.
Communication Options: Supports 4-20 mA and RS485 Modbus (ASCII or RTU) for integration with control systems.
MinIPID T2 10.0 eV Sensor: Provides improved sensitivity and reliability, eliminating interference from other gases.
Modular Design: Features a plug-and-play service module for easy maintenance and reduced downtime.
Environmental Protection: IP65 rated for dust and water resistance, suitable for challenging conditions.

Technical Specifications:

Sensor Type: MiniPID T2 10.0 eV
Detection Range: 0.02 ppm - 20 ppm
Accuracy: ± 50 ppb or ± 10%, whichever is greater
Operating Temperature: -20°C to +50°C
Power Requirements: 24 V DC nominal, with a range of 19 V to 32 V DC
Data Storage: Onboard MMC with a minimum of six months capacity (2GB)
Approvals: ATEX, IECEx, and QPS certified for hazardous environments

Applications: The TITAN 2 is ideal for monitoring benzene levels to ensure worker safety and assess the performance of purification or vapor recovery systems.

Additional Features:

Extended Warranty: Option to extend the warranty up to 2 years upon registration.
Visual Alarms: Clear display and visual alarms for benzene level indication.
Service Intervals: Regular maintenance required every 6 to 12 months for optimal performance.

Catalog excerpts

TITAN 2 Pioneering Gas Sensing Technology. ionscience.com

Open the catalog to page 1

TITAN 2 Monitor and sample benzene with world leading benzene detection technology! Pioneering Technology Titan 2 offers a world-leading solution for the detection of benzene, capable of gas speciation and accurately detecting benzene down to as low as 0.02 ppm (20 ppb) and as high as 20 ppm within a span of 60 seconds. Titan 2 is designed to sample airbourne hazards for the safety of your workforce on site. It can also be used to assess the performance of purification or vapour recovery systems/units (VRU). This device incorporates the NEW MinIPID T2 10.0 eV which offers improved sensitivity,...

Open the catalog to page 2

IfflR 5 ATEX, lECEx and QPS approved Clear display & visual alarms for indication of benzene levels TITAN Benzene Monitor Internal data storage, can be downloaded for analysis Modular design for ease of installation and servicing Internally regulated heating for stable operation at extreme temperatures Samples gas once per minute Impressive Modular Design Titan 2 is designed to be easily installed and serviced. Its modular design allows the Ex d case to be installed well in advance of commissioning. The service module can be removed and replaced as a remotely serviceable plug-and-play cartridge...

Open the catalog to page 3

Sensor Type MiniPID T2 10.0 eV Sensor Selectivity Benzene specific within typical petrochemical matrix Detectable Range 0.02 ppm - 20 ppm Measuring Frequency One minute Lower Limit of Detection 0.02 ppm (20 ppb) (10 ppb resolution) Accuracy ± 50 ppb or ± 10%, whichever is greater* Temperature Stability Internally heated Flow Rate Sample flow rate > 100 ml/min Display • Graphical BW LCD 64 x 128 pixels with back light Bright LEDs for normal operation, fault and alarm • Two magnetic switches for menu operation Operating Temperature Recommended operating range of -20 oC to +50 oC ( -4 oF to +122...

Open the catalog to page 4

All ION Science Global catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list