SPRING CHECK VALVE MOD. AURORA PTFE
1 / 1 PageView full catalog
SPRING CHECK VALVE MOD. AURORA PTFE
Product catalog summary
Product Overview:
The document provides technical specifications for the Spring Check Valve Model Aurora, made from stainless steel AISI 316 with a PTFE seat. It is certified under EN 10204/2.1 standards.
The document provides technical specifications for the Spring Check Valve Model Aurora, made from stainless steel AISI 316 with a PTFE seat. It is certified under EN 10204/2.1 standards.
Technical Specifications:
- Material: Stainless Steel AISI 316 (CF8M)
- Seal Material: PTFE
- Thread Ends: EN 10226-1 (EX ISO 7-1 and DIN 2999)
- Maximum Working Pressure: 16 Kg/cm²
- Operating Temperature Range: -25°C to +180°C
- Minimum Opening Pressure: 0.13 bar
Applications:
The valve is suitable for use with water, acids, and compatible solvents.
The valve is suitable for use with water, acids, and compatible solvents.
General Dimensions:
| Size | Code | Dimensions (mm) | Weight (Kg) |
|---|---|---|---|
| 3/8” | IV9013/8 | 10 x 30 x 54 | 0.15 |
| 1/2” | IV9011/2 | 15 x 34.5 x 57 | 0.17 |
| 3/4” | IV9013/4 | 20 x 41.5 x 64 | 0.29 |
| 1” | IV9011 | 25 x 48 x 75 | 0.44 |
| 1 1/4” | IV90111/4 | 32 x 60.5 x 82 | 0.67 |
| 1 1/2” | IV90111/2 | 40 x 71 x 93 | 1.0 |
| 2” | IV9012 | 50 x 87 x 100 | 1.61 |
Materials Used:
- Body and Cover: Stainless Steel CF8M
- Disc: Stainless Steel AISI 316
- Spring: Stainless Steel AISI 302/304
- Stem: Stainless Steel AISI 316
- Body Gasket: PTFE
Additional Notes:
The technical data provided is indicative and not binding. The document was issued in 2016 and is a revision 02.
The technical data provided is indicative and not binding. The document was issued in 2016 and is a revision 02.
See more
Catalog excerpts
ART. 901 - PTFE VALVOLA DI RITEGNO A MOLLA MOD. AURORA ART. 901 - PTFE SPRING CHECK VALVE MOD. AURORA CERTIFICATES EN 10204/2.1CARATTERISTICHE TECNICHE 1. Valvola di ritegno a molla 2. Acciaio inossidabile AISI 316 3. Guarnizione di tenuta PTFE 4. Estremita filettate secondo EN 10226-1 (EX ISO 7-1 e DIN 2999) 1. Spring check valve Nota: i dati tecnici su questo catalogo sono indicativi e non impegnativi / Note: the technical data reported in this catalogue is proximative and not binding. Data di emissione: 2016 Revisione: 02 / Date of issue: 2016 Revision: 02 Copyright ® Intertubi S.p.a. Tutti i diritti sono riservati / Copyright ® Intertubi S.p.a. All rights reserved
Open the catalog to page 1All Intertubi catalogs and technical brochures
FLANGED ENDS Y STRAINER1 Page
SEAMLESS PIPES1 Page
STUB-ENDS SHORT LENGTH1 Page
CONCENTRIC REDUCERS2 Pages
LONG RADIUS ELBOWS 90°1 Page
short radius ELBOWS 90°1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.