Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. INTERSEWER UG (haftungsbeschränkt)
  3. SEWER JETTING HOSES

SEWER JETTING HOSES

SEWER JETTING HOSES
1 / 1 PageView full catalog

SEWER JETTING HOSES

Product catalog summary
Specifications:
The document describes a specially designed hose with a minimum bend radius, optimum cut and wear resistance, and resistance to microbiological degradation. It features a bonded tube and cover, is lightweight compared to conventional rubber alternatives, and offers an increased lifetime. The hose is available in long lengths.

Construction:
The core is made of special Polyether Polyurethane, reinforced with 1 or 2 braids of Aramid Fibre, and covered with blue Polyurethane.

Temperature Standards:
The hose operates effectively within a temperature range of -40°C to +60°C.

Product Variants:
The document lists different hose models with their respective dimensions and pressure ratings:
  • IS12HF: 1/2 inch (12.7 mm) I.D., 0.810 inch (20.6 mm) O.D., 4000 psi (275 bar) working pressure, 16000 psi (1120 bar) burst pressure, 80 mm (3.2 inch) minimum bend radius.
  • IS20HF: 3/4 inch (19.1 mm) I.D., 1.150 inch (29.2 mm) O.D., 3600 psi (250 bar) working pressure, 9000 psi (625 bar) burst pressure, 125 mm (5.0 inch) minimum bend radius.
  • IS25HF: 1 inch (25.4 mm) I.D., 1.440 inch (36.6 mm) O.D., 3600 psi (250 bar) working pressure, 9000 psi (625 bar) burst pressure, 150 mm (6.0 inch) minimum bend radius.
  • IS32HF: 1 1/4 inch (31.5 mm) I.D., 1.800 inch (45.7 mm) O.D., 3600 psi (250 bar) working pressure, 9000 psi (625 bar) burst pressure, 250 mm (10.0 inch) minimum bend radius.
See more

Catalog excerpts

SEWER JETTING HOSES-1

INTERSEWER Highflex Application: • Specially designed to meet minimum bend radius • Optimum cut and wear resistance • Resistant to microbiological degradation • Bonded tube and cover Lightweight compared to conventional • rubber alternatives • Increased lifetime • Available in long lengths Construction: Core: Special Polyether Polyurethane Reinforcement: 1 or 2 braids of Aramid Fibre. Cover: Blue colour Polyurethane. Temperature Standards: -40°C to + 60°C Anwendung: • Geringer Biegeradius • Optimaler Schnitt- und Abriebschutz • Schutz gegen mikrobiologischen Kontamination • Innenseele und Schlauchdecke mit Drucktrager verklebt • Leicht im Vergleich zu Gummischlauchen • Lange Lebensdauer • In langen Langen verfugbar Konstruktion: Seele: Spezielles Polyether Polyurethan Drucktrager: 1 und 2 Aramid Geflechtslagen. Oberdecke: Polyurethan blau. Temperatur Bereich: -40°C bis + 60°C Working Pressure INTERSEWER UG (haftungsbeschraenkt) Phone: +49 7034-27044-100 Fax: +49 7034-27044-102

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.