Residence Type Outdoor Stainless Intercom Unit DESCRIPTION FUNCTIONS ITR650-0001 is an Outdoor Intercom Unit with Android OS that is mainly used for making interacting with the related indoor intercom unit such as an indoor monitor. It allows you to easily monitor an entrance door or gate and gives you the confidence that your home has more security. Users can communicate with visitors via audio and video calls, and unlock the door if they need. Besides, users can use IC/ID cards to unlock the door, too. Product Code Power Supply Power Consumption Operating System Door Relay Control Method Facial Recognition Video Codec Audio Codec Night Vision Temperature Range 3 W (Standby Power) , 10 W (Rated Power) TCP/IP, SIP, VOIP, RTSP Android 4.4.2 Quad Core 1.3 GHz 512 MB SD Ram, 8 GB Flash, 32 GB Micro SD Card Piezoelectric Keypad DTMF, HTTP, Key Code, IC/ID Card, Face recognition 10.000 different face recognition H.264 G.711, G.729 1 MPCMOS LED Night Vision IP 65 < 90 RH Aluminum Alloy Light Grey and Black GENERAL FEATURES Camera Digital Keypad Card Reader Area Display Screen ITR650-0001 is an Outdoor Panel Unit with that mainly used for make interacting between the related indoor intercom unit. ITR650-0001 product features are described below : • A video intercom with an indoor monitor and management centre. • Door opening can be done with a password, IC / ID card and face recognition. • It can register IC/ID card information on the outdoor panel and store up to 100,000 IC/ID cards (ID card is optional). • Support Exit button unlocking and door magnetic detection. • Face recognition with an infrared supported night vision camera. INSTALLATION ijijuu When mounting the built-in box, do not fix the frame into the wall. The supporting frame should be in parallel with the wall.

CONNECTION DIAGRAM & FEATURES Card Reader Interface: RS-485: The following figure, shows a proper location of the installation : The interface can be connected to one IC/ID card reader or be used for reading the information of the built-in card reader. It can output the power 5 V/100 mA. When the card reader does not have the power from the interface, a wire connection of +5 V is not required: Connect with RS-485 device; RS-485 interface can output 12 V / 100 mA power supply. If RS-485 equipment to be connected does not require the power supply, no need to connect +12 V. During the installation,...