DESCRIPTION FUNCTIONS Interra ITR640-001 door front SIP intercom unit can be used to provide intelligent access control in places such as villa, residence, office etc. With the card reader feature, you can provide access control and a high level of security in your building. Thanks to the high image quality, it is easier to recognize the guests in speeches made in dark environments with the night vision feature. INTERRA Device Power Supply Power Consumption Communication Operating System CPU Memory Button Reader Door Relay Control Method Video Codec Audio Codec Camera Night Vision Type of Protection Temperature Range Maximum Air Humidity Material Colour Flammability Dimensions Configuration ITR640-001 12V, PoE 1.5W (Standby Power), 3 W (Rated Power) TCP/IP, SIP, VOIP, RTSP Linux 1 GHz 64 MB SD Ram 128 MB Flash One mechanical button 10,000 IC/ID Cards DTMF, HTTP, IC/ID Card H.264 G.711 1 MPCMOS LED Night Vision IP 40 Operation (-5°C...55°C) Storage (-10°C...70°C) < 90 RH Plastic Light Grey , Black Non-flammable product 111x170.5x38.6 mm (WxHxD) via Webpage GENERAL FEATURES ITR640-001 is an Outdoor Panel Unit with that mainly used for make interacting between the related indoor intercom unit. ITR640-001 product features are described below : • Call indoor monitor by one button • Support unlocking by IC/ID access control card or DTMF. • IC/ID card information can be registered on outdoor panel. Registration information of max. 10,000 IC/ID cards can be stored • Support unlocking by Exit button and door magnetic detection • Support LED light for night vision • Support POE power supply (optional) INSTALLATION Please, perform the installation as indicated in the picture below.

CONNECTION DIAGRAM & FEATURES The following figure, shows a proper location of the installation : Power / Unlock Signal Output: Power input interface connects with 12V DC power adapter. Wiring diagram is as follows: Connect with RS-485 device; RS-485 interface can output 12V / 100mA power supply. If RS-485 equipment to be connected does not require the power supply, no need to connect +12 V. Switching Value Output: It provides contact signal of switching value and needs, independent power supply for the lock. The electric lock can be connected in two ways including normally-open connection and...