ITR410-002 - WIDE-RANGE CEILING MOUNT PRESENCE SENSOR DESCRIPTION ITR410-002 Ceiling Mount Presence & Lux Sensor is able to sense • The multi-function motion sensor can report movement status, tem- motion, temperature, and lighting intensity. Designed to be ceiling mounted the presence sensor is able to detect a presence at up to 24meters away, making it ideal for lighting and security applications. For a tailored detection solution the detection area can be partitioned via ETS software, enabling custom detection zones to be created. ITR410-002 Power Supply IMPORTANT NOTES • Special Programming – This device is designed for professional KNX installation. It can only be programmed by ETS software. Current Consumption • Cable Connections – Do not get wrong connection for Black and Red wires • Mounting Location –Installed indoors，to avoid installed near the air-conditioning vent, away from the heat producer. Temperature Range Maximum Air Humidity Flammability IP 20 Operation (-5°C...45°C) Storage (-20°C...60°C) < 90 RH Non-flammable Product • Bus Voltage - The input of voltage must be between 21-30VDC. • Installation position – Indoor, keep it away from AC outlet and heat source. • Do not let the module come into contact with liquids and do not get • The 24M Sensor detect range can be up to 22 meters, recommended assembly height is 2.5 m. • The multi-function motion sensor supports constant brightness output. • It can controls for Switch control, Absolute dimming control, Shutter control, Alarm control, Percentage control , Sequence control, Scene control, String control, Logic combination control. • With function of constant brightness: keep the lux in the constant value, will dim the lights to the corresponding intensity according to the surrounding brightness. • The logic validity can be set by dry contact or external telegram, enable end-user to enable or disable the preset logics. • The work mode include single mode and Master & Slave mode. One master sensor can be used in conjunction with multiple slave sensors, When slave sensor detects the movement, will send the data to master sensor, then the master sensor will control the targets. AC voltage into Bus wire, it will damage all of devices in system Walking across Walking towards perature, Lux or dry contacts status to KNX system. Dry contact, from left are Com, dry contact 1, dry Anti-creep, seated activity smaller Light Grey and White KNX/EIB interface Programming LED (VE7): For indicating normal mode (LED Off) or addressing mode (LED On); it is automatically Off once the physical address has been modified. or idle mode (LED Off) Working LED (VE8): detect any movement LED Programming button IR detectors: each detector has specified num- Certification Configuration ber that could be set enable or disable individual- ly for different zone detect. The specified number