Website:
International Polymer Solutions Inc.
Catalog excerpts
International Polymer Solutions 5 Studebaker, Irvine, CA 92618 Tel: 949.458.3731 Fax: 949.458.2728 www.ipolymer.com Email: Manual PTFE Ball Valves Our IPS Ball Valve features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments. Polytetrafluoroethylene (PTFE), commonly known by its popular E.I. DuPont trade name TEFLON®, is also well suited to clean room and deionized water applications. The body, stem, ball and ports are constructed from PTFE. For standard applications, external non wetted components are constructed from Natural PVDF and Polypropylene. Features: * PTFE construction for media wetted surfaces. * Reliable low torque manual operation. * Quarter Turn with Positive Stops. * Standard as panel mounted & high temperature. * Media Operating Pressure = 120 psi max • 25 in Hg vacuum. * Media Operating Temperature = 320ºF (160ºC) max • 32ºF (0ºC) min. * Ambient Temperature = 150ºF (65ºC) max • 32ºF (0ºC) min. Port Size
Open the catalog to page 1All International Polymer Solutions Inc. catalogs and technical brochures
-
IPS Water Valve Catalog2 Pages
-
IPS PTFE Spray Gun Catalog8 Pages
-
IPS Quick Dump Valve Catalog2 Pages
-
IPS PTFE Plug Valve Catalog2 Pages
-
IPS Drain Valve Catalog2 Pages
-
IPS Diverter Valve Catalog2 Pages
-
IPS DI Water Valve Catalog2 Pages
-
IPS PTFE Check Valve Catalog2 Pages
-
IPS PTFE Ball Valve Catalog2 Pages
-
IPS PTFE Aspirator Catalog2 Pages
-
IPS Air Cylinder Catalog4 Pages
-
Suck Back Valves1 Pages
-
IPS Catalog96 Pages
