Catalogs >
International Polymer Solutions Inc. >
IPS PTFE Submini Solenoid Valve Catalog

IPS PTFE Submini Solenoid Valve Catalog
2Pages

Catalog excerpts

IPS PTFE Submini Solenoid Valve Catalog - 1

Sub-miniature Solenoid Valves Our IPS Sub-miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and three seat sealing methods, our IPS Sub-miniature Solenoid Valves are suitable for a wide range of ultra clean to highly corrosive media applications. Our PTFE wetted surface design is ideally suited for semiconductor, pharmaceutical, bio-medical and chemical process applications. Configurable with a FKM-Viton Seat, FEPM-AFLAS Seat or FFKM-Kalrez Seat, the Sub-mini Series Solenoid Valve line provides unsurpassed chemical compatibility with a wide range of flow media. The PTFE body, valve stem and one piece diaphragm maintain a material inert boundary for ultra-clean and harsh-caustic applications. Maximum Port Pressure O-Ring Seat Rating (psi) HIGHLIGHTS: • PTFE design optimized for ultra clean and chemical compatibility. Common Port Normally Closed Port Normally Open Port coil response time from proven technology. • Valve seat and diaphragm designed for positive flushing and bubble-tight shut off. various DC & AC voltages. • Fast, accurate and repeatable Inlet Port Outlet Port Outlet Port • Non-porous diaphragm configured to completely isolate solenoid coil from media. General Valve Parameters require energizing pressure or vacuum to operate. • Maximum recommended Duty Cycle 62%. • Designed for aggressive media Common Port Vacuum in-Hg (max) Media Temperature (range) Ambient Temperature (range) Wattage Range Voltage Tolerance Coil Lead Length (2 Wire) • 100% coil driven – does not international polymer solutions inc. • manufacturer of high purity flow control products • www.ipolymer.co

Open the catalog to page 1

IPS PTFE Submini Solenoid Valve Catalog - 2

* (-M) Optional Legacy Mounting * (-M) Optional Legacy Mounting Solenoid Valves: ORDERING FORMAT S Valve Series See Below 3-Way Valve Only Porting w/Max Orifice See chart below Valve Seat V = Viton A = AFLAS K = Kalrez Valve Configuration 2C = 2 Way Normally Closed 2O = 2 Way Normally Open 3W = 3 Way LM Optional Legacy Mounting Configuration -LM = at end of part number Optional Legacy Mounting Configuration Body Material 1B = PTFE 2B = PEEK 3B = Polypro Consult Factory For Custom Configurations. Porting w/ Max Orifice Port Type/Size and Standard Orifice 1 1/4”-28-UNF Female with 0.063”...

Open the catalog to page 2