Sub-miniature Pneumatic Valves Our IPS Subminiature Pneumatic Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four body port configurations and four sealing methods, our IPS Sub-miniature Pneumatic Valves are suitable for a wide range of ultra clean to highly corrosive media applications. Our PTFE wetted surface design is ideally suited for semiconductor, pharmaceutical, bio-medical and chemical process applications. The valves can also be configured with PEEK and Polypropylene bodies for other industrial applications. The Submini family has four O-Ring seat seal options: FKM-Viton, FEPM-AFLAS, FFKM-Kalrez, and EPDM. Providing unsurpassed chemical compatibility, with a wide range of flowing media, the PTFE valve stem and diaphragm design maintains an inert boundary for ultra-clean and harsh-caustic applications. HIGHLIGHTS: • PTFE design optimized for ultra clean and chemical compatibility. • Configured with a reliable pneumatic actuator. • Valve seat and diaphragm designed for positive flushing and tight shut off. • Non-porous diaphragm isolates actuator from fluid media. • 100% pneumatic driven – does not require electrical power. • Designed for aggressive media and elevated temperature. Maximum Port Pressure General Valve Parameters 0.063” Orifice Cv (2-Way / 3-Way) Common Port Vacuum in-Hg (max) Media Temperature (range) Pneumatic Actuator Pressure Range (psi) Common Port Normally Closed Port Normally Open Port Ambient Temperature (range) Outlet Port international polymer solutions inc. • manufacturer of high purity flow control products • www.ipolymer.co

LEGACY MOUNTING TYPE 4, 5, 6 & AND PORT DIMENSIONS "A" Port Type PORT TYPE Porting w/Max Orifice See chart below Valve Configuration 2C = 2 Way Normally Closed 2O = 2 Way Normally Open 3W = 3 Way UNLESS OTHERWISE NOTED TOLERANCES ON: DECIMALS ANGLES 1 .XX .010 PORT TYPE A 4 (1/4 FNPT) Body Material 1B = PTFE 2B = PEEK 3B = Polypro Optional Legacy Mounting Configuration See 5Below (1/8 TUBE) 3-Way Valve Only 6 (1/4 TUBE) MATL. SPEC. SURFACE FINISH DRAWN CHECKED APPROVED DATE OF DWG. DRAWN CHECKED APPROVED DATE OF DWG. Pneumatic Valves: ORDERING FORMAT P 1 3W 1B – V – Valve Series 125 UNLESS OTHERWISE...