PTFE Spray Guns Spray Guns (SG) Our spray guns are constructed of virgin PTFE and Polypropylene to provide them with a long life span in harsh acidic or corrosive environments. Due to their design and comfortable grip Spray Guns are quickly becoming the industry standard in semiconductor fab plants, wet benches and work processing stations. All the Spray Guns may be purchased individually or with a variety of fittings and hoses. Recirculating Spray Gun (RC) The Recirculating Spray Guns all have molded PTFE bodies with PVDF pistons. Theses RC Guns are designed so that there is very little dead space for bacteria to grow. DI water is able to circulate up to the sealing seat through out the entire gun and piston. From the sealing seat on, bacteria build up is kept to a minimum by using a 1/16” thick spray nozzle. Nitrogen Guns (Nitro) Our PTFE Nitrogen Guns (Nitro) can deliver maximum anti-corrosion protection wherever extreme chemical environments are used in the vicinity of nitrogen dispensing or dying. Like its companion, the DI Water Spray, Nitro is manufactured of the same durable materials to resist acid attacks. Dispense Guns (DG) Both of the dispense guns, standard or high flow, are designed with the spring totally isolated from the media, thus making them the perfect choice for dispensing acids and solvents. The longer nozzle on the dispense guns allows for them to be inserted into a container thus minimizing splashing. Eye Wash (EW) PTFE Eye Wash is designed to provide emergency eye/facial rinse. When activated a soft flow of aerated water is released. The non-metallic aerator converts harsh city water into a bubbly smooth stream while the PTFE body remains inert to its potentially hostile chemical environment. international polymer solutions inc. • manufacturer of high purity flow control products www.ipolymer.com | info @ ipolymer.co

DI SPRAY / RINSING GUNS (Max. operating pressure 75 PSI) (Media Temperature Range: 40ºF – 130ºF) Standard Spray Gun with 1/2” FNPT inlet thread.(1) Spray Gun with 3/8” FNPT inlet thread. Spray Gun with 1/4” FNPT inlet thread. NOTE: ADD -FT FOR FRONT TRIGGER OPTION. Source Fitting Special Nozzle Configurations Available international polymer solutions inc. • manufacturer of high purity flow control products 5 Studebaker • Irvine, CA 92618 • t: 949.458.3731 •

RECIRCULATING SPRAY GUNS (Media Temperature Range: 40°F - 130°F) Recirculating spray gun with 1/2" FNPT inlet thread (gun only).(1) Hose Assy. Recirculating Device: IPS Recirculating Spray Guns ("RC" style) are designed to eliminate bacterial growth in Dl water spray systems. When the spray gun is not in use, the Dl water travels back down the parallel recirculation flow path and returns to the client Dl recovery tank or drain line. By eliminating stagnant pooling water, this open continuous recirculation path reduces bacterial growth. ■ lnl«t Dl Water Flow Recirculation Return international...

NITROGEN / DRYING GUNS (3) (Max. operating pressure 75 PSI) (Media Temperature Range: 40ºF – 130ºF) Standard nitrogen hand spray with 1/4” FNPT inlet thread, filter housing with disposable filter. Same as Nitro 1 only using a standard spray gun body configuration. NOTE: ADD -FT FOR FRONT TRIGGER OPTION (NITRO-2 ONLY) Assemblies Source Part No. Hose Assy. Intercon. Fitting NOTE: ADD -FT FOR FRONT TRIGGER OPTION (NITRO-4 AND NITRO-4T ONLY) international polymer solutions inc. • manufacturer of high purity flow control products 5 Studebaker • Irvine, CA 92618 • t: 949.458.3731 • f: 9

EYE WASH (3) (Max. operating pressure 75 PSI) (Media Temperature Range: 60ºF – 100ºF) Standard eye wash with 1/4” FNPT inlet thread. Assemblies Part No. Gun Hose Assy. Intercon. Fitting Source Fitting international polymer solutions inc. • manufacturer of high purity flow control products 5 Studebaker • Irvine, CA 92618 • t: 949.458.3731 • f: 9

LIQUID DISPENSING GUNS (Max. operating pressure 75 PSI) (Media Temperature Range: 40ºF – 130ºF) Standard dispense gun with isolated spring, flow rate 1 GPM. Available in choice of O-ring material: Ethylene Propylene (EP), for use with solvents; Viton (VT), for use with most acids; Kalrez (KA), for use with highly aggressive fluids. To order dispense gun with the correct O-ring, replace “XX” in the DG part number; with the applicable suffix (EP, VT or KA). Standard dispense gun with 1/4” FNPT inlet thread. Standard dispense gun with 3/8” FNPT inlet thread. (1) Standard dispense gun with 1/2” FNPT...

Reference Description of Assemblies and Spare Parts 304 1/8" ID x 1/4" OD x 8' Long Bendable PTFE Tubing 306 1/4" ID x 3/8" OD x 8' Long Bendable PTFE Tubing 308 3/8" ID x 1/2" OD x 8' Long Bendable PTFE Tubing C4-FEP-MCF44 C4-FEP Tubing with PTFE Fittings at both ends C6-FEP-MCF66 C6-FEP Tubing with PTFE Fittings at both ends C8-FEP-MCF88 C8-FEP Tubing with PTFE Fittings at both ends C4-PU 1/4" OD Blue Polyurethane Coiled Hose® C4-PU-J44 C4-PU Hose with Polypro Fittings at both ends C6-PU 3/8" OD Blue Polyurethane Coiled Hose® C6-PU-J66 C6-PU Hose with Polypro Fittings at both ends C8-PU 1/2"...

Part No. Reference Description of Assemblies and Spare Parts J44 JACO Male Connector - Polypropylene. 1/4” Tube x 1/4” MNPT JACO Male Connector - Polypropylene. 3/8” Tube x 1/4” MNPT JACO Male Connector - Polypropylene. 3/8” Tube x 3/8” MNPT JACO Male Connector - Polypropylene. 3/8” Tube x 1/2” MNPT JACO Male Connector - Polypropylene. 1/2” Tube x 1/2” MNPT IPS Male Connector - PTFE. 1/4” Tube x 1/4” MNPT IPS Male Connector - PTFE. 3/8” Tube x 3/8” MNPT IPS Male Connector - PTFE. 1/2” Tube x 1/2” MNPT Nitrogen filter housing Nitrogen filter retaining ring Nitrogen filter O-ring Disposable nitrogen...