PTFE PRESSURE REGULATOR Our IPS PTFE Pressure Regulator is designed for use in high purity water and aggressive chemicals applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal for DI Water Systems and corrosive media found in solar, semiconductor, pharmaceutical and chemical process applications. All configurations are fitted for Panel Mounting with easy-to-grip Adjustment Knob. The Teflon coated stainless steel adjustment screw is configured for low torque reliable manual operation. Other sizes and configurations are available on request. Specification: Materials of Construction: • Wetted Surfaces: Machined 100% Virgin PTFE & TFM • Non Wetted Materials: PVDF, Brass, Polypro, SS • Regulating Springs: Coated Steel Temperature Ranges: • • Pressure Ranges: • • • • Maximum Inlet Pressure: 90 psi. Two factory set pressure regulating options: LO = 0 to 40 psi and HI = 30 to 60 psi. Referenced pressure ranges are listed for normal media temperature conditions. Consult factory for pressure ranges when operating with media temperatures greater than 160°F. international polymer solutions inc. • manufacturer of high purity fluid handling products www.ipolymer

1.43 Recomended Panel Hole Diameter .40 MAX Recomended Panel Thickness INLET PORT 1.13 ("A") FNPT ("A") TUBE ("A") FLARE PTFE Pressure Regulator: ORDERING FORMAT PRG - 2 2 - P - HI PORT SIZE & ORIFICE SIZE Callout Port Size Orifice Size LO = Represents the factory set low pressure range of 0 psi to 40 psi. HI = Represents the factory set high pressure range of 30 psi to 60 psi. PORT TYPE Callout Port Type Turn the Adjustment Knob clockwise to increase the regulator outlet pressure. Turn the Adjustment Knob counter- clockwise to decrease the regulator outlet pressure. Do not over torque the Adjustment...